Specification sheet Wheel Loader Ref new-holland-w170b-wheel-loader
New Holland W170B
The New Holland W170B is a wheel loader with an operating weight of 30,707 lb (13,928.47 kg), a 169 hp engine, and a 3.01 yd³ (2.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
30,707lb
13,928.47kg
Engine power
169hp
126.1kW
Net Power Bucket capacity
3.01yd³
2.3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the New Holland W170B sits in the middle of its class:
- Operating weight 30,710 lb heavier than 50% (n=439)
- Engine power 169 hp more powerful than 54% (n=408)
- Bucket capacity 3 yd³ smaller-bucket than 60% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2249 | |
|---|---|---|
| Engine Model | 667TA/EB3 | |
| Net Power | 169hp | 126.1kw |
| Gross Power | 181hp | 135kw |
| Max Torque | 625lb ft | 847.4Nm |
| Displacement | 411cu in | 6.8L |
| Aspiration | Turbochaged, air to air cooled | |
| Torque Rise | 25% |
02 Operational Specification
| Operating Weight | 30707lb | 13928.5kg |
|---|---|---|
| Fuel Capacity | 66.9gal | 253.3L |
| Hydraulic System Fluid Capacity | 51gal | 193.1L |
| Engine Oil Fluid Capacity | 3.6gal | 13.3L |
| Cooling System Fluid Capacity | 9.8gal | 37L |
| Transmission Fluid Capacity | 6.8gal | 25.6L |
| Front Axle/Diff Fluid Capacity | 8.1gal | 30.3L |
| Rear Axle/Diff Fluid Capacity | 7.3gal | 27.4L |
| Static Tipping Weight | 27578lb | 12509.2kg |
| Turning Radius | 18.9ft in | 5750mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5R25 XHATL Michelin Radials |
03 Transmission Specification
| Transmission Type | Countershaft,Power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.5mph | 37.9km/h |
| Max Speed - Reverse | 16mph | 25.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2800psi | 19305.4kPa |
|---|---|---|
| Pump Flow Capacity | 22.6gal/min | 85.6L/min |
| Raise Time | 5.6sec | |
| Dump Time | 2.4sec | |
| Lower Time | 3.3sec | 3.29sec |
| Pump Type | Variable-Displacement, Piston Pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.72ft in | 2962mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.01yd3 | 2.3m3 |
| Bucket Capacity - Struck | 2.54yd3 | 1.94m3 |
| Bucket Width | 8.86ft in | 2700mm |
| Breakout Force | 32958lb | 146.61kN |
06 Dimensions Dimensions
| Ground Clearance | 1.56ft in | 474mm |
|---|---|---|
| Length With Bucket On Ground | 24.94ft in | 7600mm |
| Width Over Tires | 8.41ft in | 2562mm |
| Height To Top Of Cab | 11.19ft in | 3410mm |
| Wheelbase | 10.68ft in | 3253mm |
| Hinge Pin - Max Height | 13.06ft in | 3978mm |
| Reach At Max Lift And Dump | 3.57ft in | 1087mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.