Specification sheet Wheel Loader Ref new-holland-w130tc-wheel-loader
New Holland W130TC
The New Holland W130TC is a wheel loader with an operating weight of 27,711 lb (12,569.5 kg), a 136 hp engine, and a 2.66 yd³ (2.04 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
27,711lb
12,569.5kg
Engine power
136hp
101.5kW
Net Power Bucket capacity
2.66yd³
2.04m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the New Holland W130TC sits below the median for its class:
- Operating weight 27,710 lb lighter than 68% (n=439)
- Engine power 136 hp less powerful than 78% (n=408)
- Bucket capacity 2.7 yd³ smaller-bucket than 72% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2249 | |
| Engine Model | 668TA/M2 | |
| Net Power | 136hp | 101.5kw |
| Gross Power | 148hp | 110.4kw |
| Power Measured @ | 1800rpm | |
| Max Torque | 509lb ft | 690.2Nm |
| Displacement | 411cu in | 6.8L |
| Torque Measured @ | 1200rpm | |
| Aspiration | Direct Injection, diesel | |
| Torque Rise | 33% |
02 Operational Specification
| Operating Weight | 27711lb | 12569.5kg |
|---|---|---|
| Fuel Capacity | 50gal | 189.3L |
| Hydraulic System Fluid Capacity | 30gal | 113.6L |
| Engine Oil Fluid Capacity | 4gal | 15.1L |
| Cooling System Fluid Capacity | 6.3gal | 23.9L |
| Transmission Fluid Capacity | 5gal | 19L |
| Front Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Rear Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Static Tipping Weight | 20290lb | 9203.4kg |
| Turning Radius | 17ft in | 5175mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5R25(L3) |
03 Transmission Specification
| Transmission Type | Countershaft, Power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24mph | 38.7km/h |
| Max Speed - Reverse | 15.6mph | 25.2km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3625psi | 24993.5kPa |
|---|---|---|
| Pump Flow Capacity | 45.2gal/min | 171.2L/min |
| Raise Time | 5.4sec | |
| Dump Time | 1.5sec | |
| Lower Time | 5sec | |
| Pump Type | Variable-Displacement, Piston Pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.07ft in | 2762mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.66yd3 | 2.04m3 |
| Bucket Capacity - Struck | 2.29yd3 | 1.76m3 |
| Bucket Width | 8.54ft in | 2602mm |
| Breakout Force | 23909lb | 106.36kN |
06 Dimensions Dimensions
| Ground Clearance | 1.56ft in | 474mm |
|---|---|---|
| Length With Bucket On Ground | 23.93ft in | 7293mm |
| Width Over Tires | 7.82ft in | 2382mm |
| Height To Top Of Cab | 11.17ft in | 3404mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 13ft in | 3961mm |
| Reach At Max Lift And Dump | 4.07ft in | 1239mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.