Specification sheet Wheel Loader Ref new-holland-w130-wheel-loader
New Holland W130
The New Holland W130 is a wheel loader with an operating weight of 26,279.1 lb (11,920 kg), a 136 hp engine, and a 2.57 yd³ (1.96 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
26,279.1lb
11,920kg
Engine power
136hp
101.5kW
Net Power Bucket capacity
2.57yd³
1.96m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the New Holland W130 sits below the median for its class:
- Operating weight 26,280 lb lighter than 76% (n=439)
- Engine power 136 hp less powerful than 78% (n=408)
- Bucket capacity 2.6 yd³ smaller-bucket than 77% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2249 | |
| Engine Model | 668TA/M2 | |
| Net Power | 136hp | 101.5kw |
| Gross Power | 148hp | 110.4kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 509lb ft | 690.2Nm |
| Displacement | 408.9cu in | 6.7L |
| Aspiration | Direct Injection, diesel | |
| Torque Rise | 33% |
02 Operational Specification
| Operating Weight | 26279.1lb | 11920kg |
|---|---|---|
| Fuel Capacity | 50gal | 189.3L |
| Hydraulic System Fluid Capacity | 30gal | 113.6L |
| Engine Oil Fluid Capacity | 4gal | 15.1L |
| Cooling System Fluid Capacity | 6.4gal | 24L |
| Transmission Fluid Capacity | 5gal | 18.9L |
| Front Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Rear Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Static Tipping Weight | 22985lb | 10425.9kg |
| Turning Radius | 17.1ft in | 5194mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5R25 |
03 Transmission Specification
| Transmission Type | Countershaft,Power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24mph | 38.7km/h |
| Max Speed - Reverse | 15.6mph | 25.2km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3600psi | 24821.2kPa |
|---|---|---|
| Pump Flow Capacity | 45.2gal/min | 171.2L/min |
| Raise Time | 5.4sec | |
| Dump Time | 1.5sec | |
| Lower Time | 5sec | |
| Pump Type | Variable-Displacement, Piston Pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.52ft in | 2901mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.57yd3 | 1.96m3 |
| Bucket Capacity - Struck | 2.18yd3 | 1.66m3 |
| Bucket Width | 8.54ft in | 2602mm |
| Breakout Force | 12051lb | 53.61kN |
06 Dimensions Dimensions
| Ground Clearance | 1.56ft in | 474mm |
|---|---|---|
| Length With Bucket On Ground | 23.2ft in | 7069mm |
| Width Over Tires | 7.95ft in | 2423mm |
| Height To Top Of Cab | 11.17ft in | 3404mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 12.57ft in | 3830mm |
| Reach At Max Lift And Dump | 7.57ft in | 2306mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.