Specification sheet Wheel Loader Ref new-holland-w110tc-wheel-loader
New Holland W110TC
The New Holland W110TC is a wheel loader with an operating weight of 23,069 lb (10,463.93 kg), a 110 hp engine, and a 2 yd³ (1.53 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
23,069lb
10,463.93kg
Engine power
110hp
82.1kW
Net Power Bucket capacity
2yd³
1.53m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the New Holland W110TC sits at the compact end of its class:
- Operating weight 23,070 lb lighter than 94% (n=439)
- Engine power 110 hp less powerful than 99% (n=408)
- Bucket capacity 2 yd³ smaller-bucket than 96% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2249 | |
| Engine Model | 445A/M2 | |
| Net Power | 110hp | 82.1kw |
| Gross Power | 119hp | 88.8kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 335lb ft | 454.2Nm |
| Displacement | 275cu in | 4.6L |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbochaged, air to air cooled | |
| Torque Rise | 14% |
02 Operational Specification
| Operating Weight | 23069lb | 10464kg |
|---|---|---|
| Fuel Capacity | 50gal | 189.3L |
| Hydraulic System Fluid Capacity | 30gal | 113.6L |
| Engine Oil Fluid Capacity | 3.1gal | 11.4L |
| Cooling System Fluid Capacity | 5.8gal | 22L |
| Transmission Fluid Capacity | 5gal | 19L |
| Front Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Rear Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Static Tipping Weight | 15522lb | 7040.7kg |
| Turning Radius | 16.2ft in | 4932mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 17.5R25 L2/L3 |
03 Transmission Specification
| Transmission Type | Countershaft,Power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.4mph | 37.7km/h |
| Max Speed - Reverse | 15.2mph | 24.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2750psi | 18960.6kPa |
|---|---|---|
| Pump Flow Capacity | 35.4gal/min | 134.1L/min |
| Raise Time | 5.6sec | |
| Dump Time | 1.1sec | |
| Lower Time | 3.7sec | |
| Pump Type | Variable-Displacement, Piston Pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.57ft in | 2610mm |
|---|---|---|
| Bucket Capacity - Heaped | 2yd3 | 1.53m3 |
| Bucket Capacity - Struck | 1.7yd3 | 1.3m3 |
| Bucket Width | 8.11ft in | 2469mm |
| Breakout Force | 22396lb | 22396- |
06 Dimensions Dimensions
| Ground Clearance | 1.24ft in | 377mm |
|---|---|---|
| Length With Bucket On Ground | 22.58ft in | 6881mm |
| Width Over Tires | 7.58ft in | 2308mm |
| Height To Top Of Cab | 10.72ft in | 3267mm |
| Wheelbase | 9.03ft in | 2750mm |
| Hinge Pin - Max Height | 12.28ft in | 3740mm |
| Reach At Max Lift And Dump | 3.69ft in | 1122mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.