Specification sheet Wheel Loader Ref new-holland-lw270-b-wheel-loader
New Holland LW270.B
The New Holland LW270.B is a wheel loader with an operating weight of 51,742.5 lb (23,470 kg), a 321 hp engine, and a 5.37 yd³ (4.1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
51,742.5lb
23,470kg
Engine power
321hp
239.4kW
Net Power Bucket capacity
5.37yd³
4.1m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the New Holland LW270.B sits in the middle of its class:
- Operating weight 51,740 lb lighter than 58% (n=198)
- Engine power 321 hp more powerful than 82% (n=190)
- Bucket capacity 5.4 yd³ smaller-bucket than 57% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2291 | |
| Engine Model | Cummins QSM11 668T/M2 A Tier 2 certified | |
| Net Power | 321hp | 239.4kw |
| Gross Power | 306hp | 228.2kw |
| Power Measured @ | 1800rpm | |
| Max Torque | 1090.2lb ft | 1478Nm |
| Displacement | 659.1cu in | 10.8L |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbocharged, air to air cooled | |
| Torque Rise | 51% |
02 Operational Specification
| Operating Weight | 51742.5lb | 23470kg |
|---|---|---|
| Fuel Capacity | 96.2gal | 364L |
| Hydraulic System Fluid Capacity | 43.6gal | 165L |
| Engine Oil Fluid Capacity | 8gal | 30L |
| Cooling System Fluid Capacity | 11.4gal | 43L |
| Transmission Fluid Capacity | 8gal | 30L |
| Front Axle/Diff Fluid Capacity | 12.2gal | 46L |
| Rear Axle/Diff Fluid Capacity | 12.2gal | 46L |
| Static Tipping Weight | 42880lb | 19450kg |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 26degrees |
03 Transmission Specification
| Transmission Type | countershaft, power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23mph | 36.9km/h |
| Max Speed - Reverse | 24.8mph | 39.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3046psi | 21001.5kPa |
|---|---|---|
| Pump Flow Capacity | 52.6gal/min | 199L/min |
| Raise Time | 6.3sec | |
| Dump Time | 1.5sec | |
| Lower Time | 4.2sec | |
| Pump Type | dual gear pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.21ft in | 3110mm |
|---|---|---|
| Bucket Capacity - Heaped | 5.37yd3 | 4.1m3 |
| Bucket Capacity - Struck | 4.58yd3 | 3.5m3 |
| Bucket Width | 9.85ft in | 3000mm |
| Breakout Force | 51032lb | 51032- |
06 Dimensions Dimensions
| Ground Clearance | 1.63ft in | 496mm |
|---|---|---|
| Length With Bucket On Ground | 28.75ft in | 8760mm |
| Width Over Tires | 9.72ft in | 2960mm |
| Height To Top Of Cab | 11.77ft in | 3587mm |
| Wheelbase | 11.16ft in | 3400mm |
| Hinge Pin - Max Height | 14.41ft in | 4390mm |
| Reach At Max Lift And Dump | 3.79ft in | 1155mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.