Specification sheet Wheel Loader Ref new-holland-lw230-b-wheel-loader
New Holland LW230.B
The New Holland LW230.B is a wheel loader with an operating weight of 45,701.83 lb (20,730 kg), a 192 hp engine, and a 4.84 yd³ (3.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
45,701.83lb
20,730kg
Engine power
192hp
143.2kW
Net Power Bucket capacity
4.84yd³
3.7m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the New Holland LW230.B sits at the compact end of its class:
- Operating weight 45,700 lb lighter than 95% (n=198)
- Engine power 192 hp less powerful than 94% (n=190)
- Bucket capacity 4.8 yd³ smaller-bucket than 84% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2291 | |
| Engine Model | Cummins 6CTAA 8.3 A Tier 2 certified | |
| Net Power | 192hp | 143.2kw |
| Gross Power | 181hp | 135kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 845.3lb ft | 1146Nm |
| Displacement | 506.5cu in | 8.3L |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbocharged, air to air cooled | |
| Torque Rise | 25% |
02 Operational Specification
| Operating Weight | 45701.9lb | 20730kg |
|---|---|---|
| Fuel Capacity | 85.9gal | 325L |
| Hydraulic System Fluid Capacity | 37gal | 140L |
| Engine Oil Fluid Capacity | 4.5gal | 17L |
| Cooling System Fluid Capacity | 12.5gal | 47L |
| Transmission Fluid Capacity | 8.5gal | 32L |
| Front Axle/Diff Fluid Capacity | 9gal | 34L |
| Rear Axle/Diff Fluid Capacity | 9gal | 34L |
| Static Tipping Weight | 37743.2lb | 17120kg |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 26.5x25 XHA Michelin |
03 Transmission Specification
| Transmission Type | countershaft, power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 24.9mph | 40km/h |
| Max Speed - Reverse | 26.8mph | 43km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2538.2psi | 17500kPa |
|---|---|---|
| Pump Flow Capacity | 94.9gal/min | 359L/min |
| Raise Time | 5.9sec | |
| Dump Time | 1.5sec | |
| Lower Time | 3.5sec | |
| Pump Type | dual gear pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.68ft in | 2950mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.84yd3 | 3.7m3 |
| Bucket Capacity - Struck | 4.19yd3 | 3.2m3 |
| Bucket Width | 9.88ft in | 3010mm |
| Breakout Force | 39463lb | 39463- |
06 Dimensions Dimensions
| Ground Clearance | 1.41ft in | 427mm |
|---|---|---|
| Length With Bucket On Ground | 27.14ft in | 8272mm |
| Width Over Tires | 9.54ft in | 2905mm |
| Height To Top Of Cab | 11.71ft in | 3569mm |
| Wheelbase | 10.83ft in | 3300mm |
| Hinge Pin - Max Height | 13.72ft in | 4180mm |
| Reach At Max Lift And Dump | 3.63ft in | 1105mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.