Specification sheet Wheel Loader Ref new-holland-lw190-wheel-loader

New Holland LW190

The New Holland LW190 is a wheel loader with an operating weight of 35,935.36 lb (16,300 kg), a 205 hp engine, and a 4.19 yd³ (3.2 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
35,935.36lb
16,300kg
Engine power
205hp
152.9kW
Net Power
Bucket capacity
4.19yd³
3.2m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the New Holland LW190 sits above the median for its class:

  • Operating weight 35,940 lb heavier than 69% (n=439)
  • Engine power 205 hp more powerful than 80% (n=408)
  • Bucket capacity 4.2 yd³ larger-bucket than 82% (n=387)

Scale drawingdrawn to scale · mm

3360B450C7990A
Side elevation
3360B3760D
Front elevation

01 Engine Specification

Engine Make 2347
Engine Model 6CT 8.3
Net Power 205hp 152.9kw
Gross Power 194hp 144.7kw
Power Measured @ 2200rpm
Displacement 506.5cu in 8.3L

02 Operational Specification

Operating Weight 35935.4lb 16300kg
Fuel Capacity 63.5gal 240L
Hydraulic System Fluid Capacity 39.7gal 150L
Static Tipping Weight 31085.2lb 14100kg
Turning Radius 21.4ft in 6500mm
Operating Voltage 24V
Alternator Supplied Amperage 50amps
Tire Size 23.5x25 XHA

03 Transmission Specification

Transmission Type countershaft, automatic
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 23.4mph 37.5km/h
Max Speed - Reverse 24.9mph 40km/h

04 Bucket Dimensions

Dump Clearance At Max Raise 9.72ft in 2960mm
Bucket Capacity - Heaped 4.19yd3 3.2m3
Bucket Width 9.59ft in 2920mm
Breakout Force 35935lb 35935-

05 Dimensions Dimensions

Ground Clearance 1.48ft in 450mm
Length With Bucket On Ground 26.22ft in 7990mm
Width Over Tires 12.34ft in 3760mm
Height To Top Of Cab 11.03ft in 3360mm
Wheelbase 10.5ft in 3200mm
Reach At Max Lift And Dump 3.52ft in 1070mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.