Specification sheet Wheel Loader Ref new-holland-lw170-wheel-loader

New Holland LW170

The New Holland LW170 is a wheel loader with an operating weight of 30,930.86 lb (14,030 kg), a 182 hp engine, and a 3.41 yd³ (2.6 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
30,930.86lb
14,030kg
Engine power
182hp
135.8kW
Net Power
Bucket capacity
3.41yd³
2.6m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the New Holland LW170 sits in the middle of its class:

  • Operating weight 30,930 lb heavier than 52% (n=439)
  • Engine power 182 hp more powerful than 66% (n=408)
  • Bucket capacity 3.4 yd³ larger-bucket than 56% (n=387)

Scale drawingdrawn to scale · mm

3300B395C7570A
Side elevation
3300B2490D
Front elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2347
Engine Model 6CT 8.3
Net Power 182hp 135.8kw
Gross Power 170hp 126.8kw
Power Measured @ 2300rpm
Displacement 506.5cu in 8.3L

02 Operational Specification

Operating Weight 30930.9lb 14030kg
Fuel Capacity 58.2gal 220L
Hydraulic System Fluid Capacity 39.7gal 150L
Static Tipping Weight 24405.2lb 11070kg
Turning Radius 19.7ft in 6000mm
Operating Voltage 24V
Alternator Supplied Amperage 50amps
Tire Size 205x25 XHA

03 Transmission Specification

Transmission Type automatic countershaft
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 22.4mph 36km/h
Max Speed - Reverse 24mph 38.5km/h

04 Hydraulic System Specification

Pump Type Pilot

05 Bucket Dimensions

Dump Clearance At Max Raise 9.19ft in 2800mm
Bucket Capacity - Heaped 3.41yd3 2.6m3
Bucket Width 8.83ft in 2690mm
Breakout Force 29542lb 29542-

06 Dimensions Dimensions

Ground Clearance 1.3ft in 395mm
Length With Bucket On Ground 24.84ft in 7570mm
Width Over Tires 8.17ft in 2490mm
Height To Top Of Cab 10.83ft in 3300mm
Wheelbase 10.01ft in 3050mm
Hinge Pin - Max Height 12.8ft in 3900mm
Reach At Max Lift And Dump 3.91ft in 1190mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.