Specification sheet Wheel Loader Ref new-holland-lw130-b-long-reach-wheel-loader
New Holland LW130.B Long Reach
The New Holland LW130.B Long Reach is a wheel loader with an operating weight of 27,734.16 lb (12,580 kg), a 149 hp engine, and a 2.57 yd³ (1.96 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
27,734.16lb
12,580kg
Engine power
149hp
111.2kW
Net Power Bucket capacity
2.57yd³
1.96m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the New Holland LW130.B Long Reach sits below the median for its class:
- Operating weight 27,730 lb lighter than 68% (n=439)
- Engine power 149 hp less powerful than 66% (n=408)
- Bucket capacity 2.6 yd³ smaller-bucket than 77% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2249 | |
|---|---|---|
| Engine Model | 667TA/M2, Tier 2 certified | |
| Net Power | 149hp | 111.2kw |
| Gross Power | 139hp | 103.7kw |
| Max Torque | 375.5lb ft | 509Nm |
| Displacement | 408.9cu in | 6.7L |
| Aspiration | Turbocharged, air to air intercooled | |
| Torque Rise | 33% |
02 Operational Specification
| Operating Weight | 27734.2lb | 12580kg |
|---|---|---|
| Fuel Capacity | 50gal | 189L |
| Hydraulic System Fluid Capacity | 30.1gal | 113.6L |
| Engine Oil Fluid Capacity | 4gal | 15.1L |
| Cooling System Fluid Capacity | 6.4gal | 24L |
| Transmission Fluid Capacity | 5gal | 18.9L |
| Front Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Rear Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Static Tipping Weight | 17639.2lb | 8001kg |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5x25 12 ply L2 |
03 Transmission Specification
| Transmission Type | countershaft, power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24mph | 38.6km/h |
| Max Speed - Reverse | 15.6mph | 25km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3600.2psi | 24822kPa |
|---|---|---|
| Pump Flow Capacity | 45.2gal/min | 171L/min |
| Raise Time | 5.4sec | |
| Dump Time | 1.5sec | |
| Lower Time | 4.4sec | |
| Pump Type | variable displacement, piston pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.91ft in | 3325mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.57yd3 | 1.96m3 |
| Bucket Capacity - Struck | 2.18yd3 | 1.66m3 |
| Bucket Width | 8.54ft in | 2602mm |
| Breakout Force | 27386lb | 27386- |
06 Dimensions Dimensions
| Ground Clearance | 1.56ft in | 474mm |
|---|---|---|
| Length With Bucket On Ground | 23.97ft in | 7304mm |
| Width Over Tires | 7.95ft in | 2423mm |
| Height To Top Of Cab | 11.16ft in | 3400mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 13.98ft in | 4259mm |
| Reach At Max Lift And Dump | 3.02ft in | 920mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.