Specification sheet Wheel Loader Ref new-holland-lw110-wheel-loader
New Holland LW110
The New Holland LW110 is a wheel loader with an operating weight of 20,723.46 lb (9,400 kg), a 120 hp engine, and a 2.23 yd³ (1.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
20,723.46lb
9,400kg
Engine power
120hp
89.5kW
Net Power Bucket capacity
2.23yd³
1.7m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the New Holland LW110 sits at the heavy end of its class:
- Operating weight 20,720 lb heavier than 92% (n=374)
- Engine power 120 hp more powerful than 94% (n=367)
- Bucket capacity 2.2 yd³ larger-bucket than 89% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2358 | |
|---|---|---|
| Engine Model | 8065T | |
| Net Power | 120hp | 89.5kw |
| Gross Power | 110hp | 82.1kw |
| Displacement | 360cu in | 5.9L |
02 Operational Specification
| Operating Weight | 20723.5lb | 9400kg |
|---|---|---|
| Fuel Capacity | 45gal | 170L |
| Hydraulic System Fluid Capacity | 27.8gal | 105L |
| Turning Radius | 18.1ft in | 5500mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 40degrees | |
| Tire Size | 17.5 x 25 |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.2mph | 35.7km/h |
| Max Speed - Reverse | 23.7mph | 38km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 8.86ft in | 2700mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.23yd3 | 1.7m3 |
| Bucket Width | 8.01ft in | 2440mm |
| Breakout Force | 17640lb | 17640- |
05 Dimensions Dimensions
| Ground Clearance | 1.23ft in | 372mm |
|---|---|---|
| Length With Bucket On Ground | 21.49ft in | 6550mm |
| Width Over Tires | 7.45ft in | 2270mm |
| Height To Top Of Cab | 10.5ft in | 3200mm |
| Wheelbase | 8.86ft in | 2700mm |
| Reach At Max Lift And Dump | 3.4ft in | 1035mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.