Specification sheet Wheel Loader Ref new-holland-lw110-b-wheel-loader
New Holland LW110.B
The New Holland LW110.B is a wheel loader with an operating weight of 23,693.09 lb (10,747 kg), a 119 hp engine, and a 1.97 yd³ (1.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
23,693.09lb
10,747kg
Engine power
119hp
88.8kW
Net Power Bucket capacity
1.97yd³
1.5m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the New Holland LW110.B sits at the compact end of its class:
- Operating weight 23,690 lb lighter than 90% (n=439)
- Engine power 119 hp less powerful than 92% (n=408)
- Bucket capacity 2 yd³ smaller-bucket than 98% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2249 | |
| Engine Model | 445T/M2 | |
| Net Power | 119hp | 88.8kw |
| Gross Power | 110hp | 82.1kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 335.6lb ft | 455Nm |
| Displacement | 275cu in | 4.6L |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbo | |
| Torque Rise | 14% |
02 Operational Specification
| Operating Weight | 23693.1lb | 10747kg |
|---|---|---|
| Fuel Capacity | 50gal | 189L |
| Hydraulic System Fluid Capacity | 30.1gal | 113.6L |
| Engine Oil Fluid Capacity | 3.2gal | 12L |
| Cooling System Fluid Capacity | 5.9gal | 22L |
| Transmission Fluid Capacity | 5gal | 18.9L |
| Front Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Rear Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Static Tipping Weight | 16365lb | 7423kg |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 17.5x25 12PR L3 |
03 Transmission Specification
| Transmission Type | countershaft, power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.4mph | 37.6km/h |
| Max Speed - Reverse | 15.3mph | 24.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3626psi | 25000kPa |
|---|---|---|
| Pump Flow Capacity | 35.4gal/min | 134L/min |
| Raise Time | 5.6sec | |
| Dump Time | 2.6sec | |
| Lower Time | 3.2sec | |
| Pump Type | variable-displacement, piston pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.65ft in | 2634mm |
|---|---|---|
| Breakout Force | _- | 74.2kN |
| Bucket Capacity - Heaped | 1.97yd3 | 1.5m3 |
| Bucket Capacity - Struck | 1.71yd3 | 1.3m3 |
| Bucket Width | 8.1ft in | 2468mm |
06 Dimensions Dimensions
| Ground Clearance | 1.42ft in | 430mm |
|---|---|---|
| Length With Bucket On Ground | 22.22ft in | 6772mm |
| Height To Top Of Cab | 10.41ft in | 3170mm |
| Wheelbase | 9.03ft in | 2751mm |
| Hinge Pin - Max Height | 11.84ft in | 3607mm |
| Reach At Max Lift And Dump | 3.68ft in | 1121mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.