Specification sheet Skid Steer Loader Ref new-holland-ls190-b-skid-steer-loader

New Holland LS190.B

The New Holland LS190.B is a skid steer loader with an operating weight of 7,625.8 lb (3,459 kg), a 74 hp engine, a rated operating capacity of 2,799.88 lb (1,270 kg), and a tipping load of 5,599.8 lb (2,540.03 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
7,625.8lb
3,459kg
Engine power
74hp
55.19kW
Net Power
Rated operating capacity
2,799.88lb
1,270kg
Tipping load
5,599.8lb † — value reconstructed from related published figures
2,540.03kg
Bucket capacity
1yd³
0.8m³

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the New Holland LS190.B sits above the median for its class:

  • Operating weight 7,630 lb heavier than 71% (n=334)
  • Engine power 74 hp more powerful than 69% (n=335)
  • Rated operating capacity 2,800 lb higher-rated than 88% (n=288)

◇Scale drawingdrawn to scale · mm

2021B257C3701A
Side elevation
2021B1810D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2249
Engine Model 445M2
Gross Power 81hp 60.5kw
Net Power 74hp 55.2kw
Power Measured @ 2300rpm
Displacement 274.7cu in 4.5L

02 Operational Specification

Operational Weight 7625.8lb 3459kg
Fuel Capacity 21.6gal 81.4L
Cooling System Fluid Capacity 4.5gal 17L
Engine Oil Fluid Capacity 3.9gal 14.5L
Max Speed 11.4mph 18.3km/h
Hydraulic System Fluid Capacity 15.1gal 56.8L
Chain Box Fluid Capacity - Each Side 3gal 11.3L
Operating Speed 7mph 11.2km/h
Tire Size 12x16.5
Operating Voltage 12V
Alternator Supplied Amperage 30amps

03 Loader Specification

Breakout Force 7669.9lb 3479kg
Operating Load Rating 2799.9lb 1270kg
Bucket Capacity 1yd3 0.8m3

04 Hydraulic Specification

Pump Type New Holland double acting
Pump Flow Capacity 21.9gal/min 83L/min
Relief Valve Pressure 3000psi 20684.3kPa

05 Dimensions Dimensions

Length With Bucket 12.15ft in 3701mm
Width Over Tires 5.94ft in 1810mm
Ground Clearance 10.12in 257mm
Height To Top Of Cab 6.64ft in 2021mm
Wheelbase 4.3ft in 1310mm
Clearance At Max Lift And Dump 0.85ft in 258.7mm
Reach At Max Lift And Dump 32.01in 813mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.