Specification sheet Skid Steer Loader Ref new-holland-ls180-b-skid-steer-loader

New Holland LS180.B

The New Holland LS180.B is a skid steer loader with an operating weight of 7,094.48 lb (3,218 kg), a 59 hp engine, a rated operating capacity of 2,200.22 lb (998 kg), and a 0.7 yd³ (0.5 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
7,094.48lb
3,218kg
Engine power
59hp
44kW
Net Power
Rated operating capacity
2,200.22lb
998kg
Bucket capacity
0.7yd³
0.5m³

Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the New Holland LS180.B sits in the middle of its class:

  • Operating weight 7,090 lb heavier than 60% (n=334)
  • Engine power 59 hp less powerful than 57% (n=335)
  • Rated operating capacity 2,200 lb higher-rated than 68% (n=288)

Scale drawingdrawn to scale · mm

1960B200C3520A
Side elevation
1960B1810D
Front elevation

01 Engine Specification

Number Of Cylinders 3
Engine Make 2249
Engine Model 334M2
Gross Power 63hp 47kw
Net Power 59hp 44kw
Power Measured @ 2300rpm
Displacement 207.5cu in 3.4L

02 Operational Specification

Operational Weight 7094.5lb 3218kg
Fuel Capacity 18gal 68.1L
Cooling System Fluid Capacity 2.2gal 8L
Engine Oil Fluid Capacity 4.5gal 17L
Max Speed 11.3mph 18.2km/h
Hydraulic System Fluid Capacity 15.1gal 56.8L
Chain Box Fluid Capacity - Each Side 2.7gal 10.2L
Tire Size 12x16.5
Operating Voltage 12V
Alternator Supplied Amperage 30amps

03 Loader Specification

Breakout Force 6034.1lb 2737kg
Operating Load Rating 2200.3lb 998kg
Bucket Capacity 0.7yd3 0.5m3

04 Hydraulic Specification

Pump Type New Holland double acting
Pump Flow Capacity 19.3gal/min 73.1L/min
Relief Valve Pressure 2600psi 17926.4kPa

05 Dimensions Dimensions

Length With Bucket 11.55ft in 3520mm
Width Over Tires 5.94ft in 1810mm
Ground Clearance 7.88in 200mm
Height To Top Of Cab 6.44ft in 1960mm
Wheelbase 4.01ft in 1220mm
Clearance At Max Lift And Dump 8.37ft in 2550mm
Reach At Max Lift And Dump 32.68in 830mm
Turning Radius From Center - Machine Rear 70.08in 1780mm
Turning Radius From Center - Inc Bucket 81.11in 2060mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.