Specification sheet Skid Steer Loader Ref new-holland-ls170-skid-steer-loader

New Holland LS170

The New Holland LS170 is a skid steer loader with an operating weight of 5,540.22 lb (2,513 kg), a 50 hp engine, a rated operating capacity of 1,765.91 lb (801 kg), and a 0.5 yd³ (0.4 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
5,540.22lb
2,513kg
Engine power
50hp
37.29kW
Net Power
Rated operating capacity
1,765.91lb
801kg
Bucket capacity
0.5yd³
0.4m³

Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the New Holland LS170 sits below the median for its class:

  • Operating weight 5,540 lb lighter than 77% (n=334)
  • Engine power 50 hp less powerful than 72% (n=335)
  • Rated operating capacity 1,770 lb lower-rated than 56% (n=288)

Scale drawingdrawn to scale · mm

1900B200C3180A
Side elevation
1900B1670D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2249
Engine Model N844T
Gross Power 52hp 38.8kw
Net Power 50hp 37.3kw
Power Measured @ 2900rpm
Aspiration Turbocharged
Displacement 121.8cu in 2L

02 Operational Specification

Operational Weight 5540.3lb 2513kg
Fuel Capacity 14.4gal 54.5L
Cooling System Fluid Capacity 2.7gal 10.2L
Engine Oil Fluid Capacity 2.2gal 8.3L
Max Speed 7.6mph 12.1km/h
Hydraulic System Fluid Capacity 8.7gal 32.6L
Chain Box Fluid Capacity - Each Side 3.3gal 12.3L
Tire Size 10x16.5
Operating Voltage 12V
Alternator Supplied Amperage 40amps

03 Loader Specification

Breakout Force 3719.2lb 1687kg
Operating Load Rating 1766lb 801kg
Bucket Capacity 0.5yd3 0.4m3

04 Hydraulic Specification

Pump Type New Holland double acting
Pump Flow Capacity 24.5gal/min 92.8L/min
Relief Valve Pressure 2600psi 17926.4kPa

05 Dimensions Dimensions

Length With Bucket 10.44ft in 3180mm
Width Over Tires 5.48ft in 1670mm
Ground Clearance 7.88in 200mm
Height To Top Of Cab 6.24ft in 1900mm
Wheelbase 3.55ft in 1080mm
Clearance At Max Lift And Dump 7.55ft in 2300mm
Reach At Max Lift And Dump 29.14in 740mm
Turning Radius From Center - Machine Rear 59.85in 1520mm
Turning Radius From Center - Inc Bucket 74.02in 1880mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.