Specification sheet Skid Steer Loader Ref new-holland-l234-skid-steer-loader

New Holland L234

The New Holland L234 is a skid steer loader with an operating weight of 8,917.7 lb (4,045 kg), and a tipping load of 6,799.1 lb (3,084 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
8,917.7lb
4,045kg
Tipping load
6,799.1lb
3,084kg

Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the New Holland L234 sits at the heavy end of its class:

  • Operating weight 8,920 lb heavier than 92% (n=334)

Not positioned on engine power, rated operating capacity — withheld or unpublished for this machine.

01 Engine Specification

Air Intake Turbocharged Aftercooled with external EGR
Fuel Injection HPCR Direct
Horsepower Per Sae J1349 Net 84hp 62.7kw
Horsepower Per Sae J1349 Gross 90hp 67.2kw
Engine Model F5BFL413E*B002
Rated Speed 2500rpm
Peak Torque 282.5lb ft 383Nm
Displacement 207.5cu in 3.4L
Bore 3.9in 99mm
Stroke 4.4in 110mm

02 Capacities Specification

Engine Oil With Filter 2.3gal 8.5L
Chain Tanks 5.9gal 22.2L
Fuel Tank 25.5gal 96.5L
Def Tank 2.9gal 10.7L

03 Performance Specification

Tipping Load 6799.1lb 3084kg
Operating Weight 8917.7lb 4045kg
Breakout Force, Bucket Cylinder 9329.6lb 41.5kN
Breakout Force, Lift Cylinder 6924.2lb 30.8kN
Rated Operating Load, 50% Tip 3399.6lb 1542kg

04 Power Train Specification

Travel Speed, Low Range 7.7mph 12.4km/h
Travel Speed, High Range 11.5mph 18.6km/h

05 Weights Specification

Operating Weight 8917.7lb 4045kg
Shipping 8576lb 3890kg

06 Hydraulic System Specification

Standard Pump Flow 24.2gal/min 91.7L/min
Optional High Flow 37.6gal/min 142.4L/min
Relief Valve Pressure 3450psi 23786.9kPa

07 Dimensions Dimensions

Ground Clearance 9.57in 243mm
Wheelbase 4.34ft in 1322mm
Bucket Hinge Pin 130.99in 3327mm
Dump Angle 54.7 degrees
Angle Of Departure 26.5degrees
Rollback, Bucket At Full Height 84.8degrees
Rollback, Bucket On Ground 32.8degrees
Top Of Rops 80.4in 2042mm
Overall Width 6.34ft in 1930mm
Bottom Of Level Bucket, Fully Raised 124.22in 3155mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.