New Holland L230
The New Holland L230 is a skid steer loader with an operating weight of 8,734.8 lb (3,962 kg), and a tipping load of 6,001 lb (2,722 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the New Holland L230 sits at the heavy end of its class:
- Operating weight 8,730 lb heavier than 91% (n=334)
Not positioned on engine power, rated operating capacity — withheld or unpublished for this machine.
01 Engine Specification
| Air Intake | Turbocharged Aftercooled with external EGR | |
|---|---|---|
| Fuel Injection | HPCR Direct | |
| Horsepower Per Sae J1349 Net | 84hp | 62.7kw |
| Horsepower Per Sae J1349 Gross | 90hp | 67.2kw |
| Engine Model | F5BFL413E*B002 | |
| Rated Speed | 2500rpm | |
| Peak Torque | 282.5lb ft | 383Nm |
| Displacement | 207.5cu in | 3.4L |
| Bore | 3.9in | 99mm |
| Stroke | 4.4in | 110mm |
02 Performance Specification
| Tipping Load | 6001lb | 2722kg |
|---|---|---|
| Operating Weight | 8734.8lb | 3962kg |
| Breakout Force, Bucket Cylinder | 8610.2lb | 38.3kN |
| Breakout Force, Lift Cylinder | 6339.7lb | 28.2kN |
| Rated Operating Load, 50% Tip | 2998.3lb | 1360kg |
03 Power Train Specification
| Travel Speed, Low Range | 7.7mph | 12.4km/h |
|---|---|---|
| Travel Speed, High Range | 11.5mph | 18.6km/h |
04 Hydraulic System Specification
| Standard Pump Flow | 24.2gal/min | 91.7L/min |
|---|---|---|
| Optional High Flow | 37.6gal/min | 142.4L/min |
| Relief Valve Pressure | 3046psi | 21001.5kPa |
05 Dimensions Dimensions
| Ground Clearance | 9.57in | 243mm |
|---|---|---|
| Wheelbase | 4.34ft in | 1322mm |
| Bucket Hinge Pin | 130.99in | 3327mm |
| Dump Angle | 54.7 degrees | |
| Angle Of Departure | 26.5degrees | |
| Rollback, Bucket At Full Height | 84.8degrees | |
| Rollback, Bucket On Ground | 32.8degrees | |
| Top Of Rops | 80.4in | 2042mm |
| Overall Width | 6.34ft in | 1930mm |
| Bottom Of Level Bucket, Fully Raised | 122.64in | 3115mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.