Specification sheet Skid Steer Loader Ref new-holland-l228-skid-steer-loader

New Holland L228

The New Holland L228 is a skid steer loader with an operating weight of 8,245.3 lb (3,740 kg), and a tipping load of 5,599.8 lb (2,540 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
8,245.3lb
3,740kg
Tipping load
5,599.8lb
2,540kg

Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the New Holland L228 sits above the median for its class:

  • Operating weight 8,250 lb heavier than 85% (n=334)

Not positioned on engine power, rated operating capacity — withheld or unpublished for this machine.

01 Engine Specification

Air Intake Turbocharged Aftercooled with external EGR
Fuel Injection HPCR Direct
Horsepower Per Sae J1349 Net 68hp 50.8kw
Horsepower Per Sae J1349 Gross 74hp 55.2kw
Engine Model F5H FL463A*F001
Rated Speed 2500rpm
Peak Torque 231.6lb ft 314Nm
Displacement 207.5cu in 3.4L
Bore 3.9in 99mm
Stroke 4.4in 110mm

02 Capacities Specification

Engine Oil With Filter 2.3gal 8.5L
Chain Tanks 5.9gal 22.2L
Fuel Tank 25.5gal 96.5L

03 Performance Specification

Tipping Load 5599.8lb 2540kg
Operating Weight 8245.3lb 3740kg
Breakout Force, Bucket Cylinder 8610.2lb 38.3kN
Breakout Force, Lift Cylinder 6137.3lb 27.3kN
Rated Operating Load, 50% Tip 2799.9lb 1270kg

04 Power Train Specification

Travel Speed, Low Range 7mph 11.3km/h
Travel Speed, High Range 10.5mph 16.9km/h

05 Weights Specification

Operating Weight 8245.3lb 3740kg
Shipping 7561.9lb 3430kg

06 Hydraulic System Specification

Standard Pump Flow 24.2gal/min 91.7L/min
Optional High Flow 37.6gal/min 142.4L/min
Relief Valve Pressure 3046psi 21001.5kPa

07 Dimensions Dimensions

Ground Clearance 8in 203mm
Wheelbase 4.34ft in 1322mm
Bucket Hinge Pin 129.41in 3287mm
Dump Angle 54.7 degrees
Angle Of Departure 23.5degrees
Rollback, Bucket At Full Height 84.8degrees
Rollback, Bucket On Ground 33.8degrees
Top Of Rops 78.82in 2002mm
Overall Width 5.81ft in 1768mm
Bottom Of Level Bucket, Fully Raised 122.64in 3115mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.