Specification sheet Skid Steer Loader Ref new-holland-l225-skid-steer-loader

New Holland L225

The New Holland L225 is a skid steer loader with an operating weight of 7,892.55 lb (3,580 kg), and a 57 hp engine.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
7,892.55lb
3,580kg
Engine power
57hp
42.51kW
Net Power

Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the New Holland L225 sits above the median for its class:

  • Operating weight 7,890 lb heavier than 77% (n=334)
  • Engine power 57 hp less powerful than 61% (n=335)

Not positioned on rated operating capacity — withheld or unpublished for this machine.

Scale drawingdrawn to scale · mm

2002C203D3624A2986B
Side elevation
2002C1930E
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make FPT
Engine Model F5C E9454
Gross Power 61hp 45.5kw
Net Power 57hp 42.6kw
Power Measured @ 2500rpm
Max Torque 225lb ft 305Nm
Torque Measured @ 1400rpm
Aspiration Turbocharged
Displacement 195.3cu in 3.2L
Bore 3.9in 99mm
Stroke 4.1in 104mm

02 Operational Specification

Operational Weight 7892.6lb 3580kg
Shipping Weight - Empty 7561.9lb 3430kg
Fuel Capacity 25.5gal 96.5L
Engine Oil Fluid Capacity 2.6gal 9.5L
Hydraulic System Fluid Capacity 6.1gal 22.8L
Max Speed 7.2mph 11.6km/h
Chain Box Fluid Capacity - Each Side 7.4gal 27.9L
Tire Size 12 X 16.5

03 Loader Specification

Tipping Load (Iso 14397) 5000.1lb 2268kg

04 Hydraulic Specification

Pump Type Gear
Pump Flow Capacity 22.5gal/min 85L/min
Relief Valve Pressure 3000psi 20684.3kPa
Raise Time 3.9sec
Dump Time 2.7sec
Lower Time 2.5sec
Displacement-Standard Aux 2.1cu in 0.1L
Displacement-High-Flow Aux 1.2cu in 0.1L

05 Dimensions Dimensions

Length With Bucket 11.89ft in 3624mm
Width Over Tires 4.81ft in 1465mm
Ground Clearance 8in 203mm
Wheelbase 4.34ft in 1322mm
Length W/O Bucket 9.8ft in 2986mm
Reach At Max Lift And Dump 32.29in 820mm
Overall Width 75.99in 1930mm
Height To Top Of Rops 78.82in 2002mm
Bucket Hinge Pin Fully Raised 10793.97ft in 3290m

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.