Specification sheet Skid Steer Loader Ref new-holland-l223-skid-steer-loader
New Holland L223
The New Holland L223 is a skid steer loader with an operating weight of 7,385.49 lb (3,350 kg), and a 68 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,385.49lb
3,350kg
Engine power
68hp
50.71kW
Net Power ◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the New Holland L223 sits above the median for its class:
- Operating weight 7,390 lb heavier than 66% (n=334)
- Engine power 68 hp more powerful than 54% (n=335)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | FPT | |
| Engine Model | F5C E9454 | |
| Gross Power | 74hp | 55.2kw |
| Net Power | 68hp | 50.8kw |
| Power Measured @ | 2500rpm | |
| Max Torque | 202.9lb ft | 275Nm |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbo | |
| Displacement | 195.3cu in | 3.2L |
02 Operational Specification
| Operational Weight | 7385.5lb | 3350kg |
|---|---|---|
| Fuel Capacity | 25.5gal | 96.5L |
| Shipping Weight - Empty | 7054.8lb | 3200kg |
| Engine Oil Fluid Capacity | 2.6gal | 9.5L |
| Max Speed | 11.9mph | 19.2km/h |
| Hydraulic System Fluid Capacity | 6.1gal | 22.8L |
| Tire Size | 12x 16.5 |
03 Hydraulic Specification
| Pump Type | Gear | |
|---|---|---|
| Pump Flow Capacity | 22.5gal/min | 85L/min |
| Relief Valve Pressure | 3000psi | 20684.3kPa |
| Raise Time | 3.9sec | |
| Dump Time | 2.7sec | |
| Lower Time | 2.5sec | |
| Displacement-Standard Aux | 2.1cu in | 0.1L |
| Displacement-High-Flow Aux | 1.2cu in | 0.1L |
04 Dimensions Dimensions
| Width Over Tires | 4.76ft in | 1448mm |
|---|---|---|
| Ground Clearance | 8in | 203mm |
| Wheelbase | 4.34ft in | 1322mm |
| Reach At Max Lift And Dump | 32.29in | 820mm |
| Overall Width | 5.77ft in | 1758mm |
| Height To Top Of Rops | 78.82in | 2002mm |
| Dump Angle | 55degrees | |
| Dump Height - Fully Raised, 45° Dump | 122.64in | 3115mm |
| Bucket Hinge Pin Fully Raised | 10793.97ft in | 3290m |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.