Specification sheet Skid Steer Loader Ref new-holland-l221-skid-steer-loader

New Holland L221

The New Holland L221 is a skid steer loader with an operating weight of 6,966.7 lb (3,160 kg), and a tipping load of 3,999.2 lb (1,814 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
6,966.7lb
3,160kg
Tipping load
3,999.2lb
1,814kg

Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the New Holland L221 sits in the middle of its class:

  • Operating weight 6,970 lb heavier than 55% (n=334)

Not positioned on engine power, rated operating capacity — withheld or unpublished for this machine.

01 Engine Specification

Air Intake Turbocharged with external EGR
Fuel Injection HPCR Direct
Horsepower Per Sae J1349 Net 68hp 50.8kw
Horsepower Per Sae J1349 Gross 74hp 55.2kw
Engine Model F5H FL463
Rated Speed 2500rpm
Peak Torque 231.6lb ft 314Nm
Displacement 207.5cu in 3.4L
Bore 3.9in 99mm
Stroke 4.4in 110mm

02 Capacities Specification

Engine Oil With Filter 2.5gal 9.4L
Chain Tanks 6.9gal 26L
Fuel Tank 19.5gal 73.8L

03 Performance Specification

Tipping Load 3999.2lb 1814kg
Operating Weight 6966.7lb 3160kg
Breakout Force, Bucket Cylinder 7261.4lb 32.3kN
Breakout Force, Lift Cylinder 4563.7lb 20.3kN
Rated Operating Load, 50% Tip 1995.2lb 905kg

04 Power Train Specification

Travel Speed, Low Range 7.8mph 12.6km/h
Travel Speed, High Range 11.4mph 18.4km/h

05 Weights Specification

Operating Weight 6966.7lb 3160kg
Shipping 6669lb 3025kg

06 Hydraulic System Specification

Standard Pump Flow 24.4gal/min 92.4L/min
Optional High Flow 33.2gal/min 125.7L/min
Relief Valve Pressure 3046psi 21001.5kPa

07 Dimensions Dimensions

Ground Clearance 8in 203mm
Wheelbase 3.71ft in 1128mm
Bucket Hinge Pin 123in 3124mm
Dump Angle 40 degrees
Angle Of Departure 25degrees
Rollback, Bucket At Full Height 99degrees
Rollback, Bucket On Ground 31degrees
Top Of Rops 78.67in 1998mm
Overall Width 5.76ft in 1755mm
Bottom Of Level Bucket, Fully Raised 116.15in 2950mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.