Specification sheet Skid Steer Loader Ref new-holland-l220-skid-steer-loader

New Holland L220

The New Holland L220 is a skid steer loader with an operating weight of 6,459.6 lb (2,930 kg), and a tipping load of 3,999.2 lb (1,814 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
6,459.6lb
2,930kg
Tipping load
3,999.2lb
1,814kg

Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the New Holland L220 sits in the middle of its class:

  • Operating weight 6,460 lb lighter than 59% (n=334)

Not positioned on engine power, rated operating capacity — withheld or unpublished for this machine.

01 Engine Specification

Air Intake Turbocharged Aftercooled with external EGR
Fuel Injection HPCR Direct
Horsepower Per Sae J1349 Net 64hp 47.8kw
Horsepower Per Sae J1349 Gross 67hp 50kw
Engine Model N844LTA
Rated Speed 2800rpm
Peak Torque 153.5lb ft 208Nm
Displacement 134.3cu in 2.2L
Bore 3.4in 84mm
Stroke 4in 100mm

02 Capacities Specification

Engine Oil With Filter 1.9gal 7.1L
Chain Tanks 2gal 7.4L
Fuel Tank 19.5gal 73.8L

03 Performance Specification

Tipping Load 3999.2lb 1814kg
Operating Weight 6459.6lb 2930kg
Breakout Force, Bucket Cylinder 5283.1lb 23.5kN
Breakout Force, Lift Cylinder 3439.6lb 15.3kN
Rated Operating Load, 50% Tip 1995.2lb 905kg

04 Power Train Specification

Travel Speed, Low Range 7.8mph 12.6km/h
Travel Speed, High Range 11.4mph 18.4km/h

05 Weights Specification

Operating Weight 6459.6lb 2930kg
Shipping 6162lb 2795kg

06 Hydraulic System Specification

Standard Pump Flow 20.6gal/min 78L/min
Optional High Flow 30.7gal/min 116.3L/min
Relief Valve Pressure 3046psi 21001.5kPa

07 Dimensions Dimensions

Ground Clearance 8in 203mm
Wheelbase 3.71ft in 1128mm
Bucket Hinge Pin 120.99in 3073mm
Dump Angle 52 degrees
Angle Of Departure 25degrees
Rollback, Bucket At Full Height 88degrees
Rollback, Bucket On Ground 34degrees
Top Of Rops 78.67in 1998mm
Overall Width 5.76ft in 1755mm
Bottom Of Level Bucket, Fully Raised 114.26in 2902mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.