New Holland L218
The New Holland L218 is a skid steer loader with an operating weight of 5,930.5 lb (2,690 kg), and a tipping load of 3,600.2 lb (1,633 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the New Holland L218 sits below the median for its class:
- Operating weight 5,930 lb lighter than 70% (n=334)
Not positioned on engine power, rated operating capacity — withheld or unpublished for this machine.
01 Engine Specification
| Air Intake | Turbocharged Aftercooled with external EGR | |
|---|---|---|
| Fuel Injection | HPCR Direct | |
| Horsepower Per Sae J1349 Net | 57hp | 42.6kw |
| Horsepower Per Sae J1349 Gross | 60hp | 44.8kw |
| Engine Model | N844LTA | |
| Rated Speed | 2800rpm | |
| Peak Torque | 135lb ft | 183Nm |
| Displacement | 134.3cu in | 2.2L |
| Bore | 3.4in | 84mm |
| Stroke | 4in | 100mm |
02 Capacities Specification
| Engine Oil With Filter | 1.9gal | 7.1L |
|---|---|---|
| Chain Tanks | 2gal | 7.4L |
| Fuel Tank | 19.5gal | 73.8L |
03 Performance Specification
| Tipping Load | 3600.2lb | 1633kg |
|---|---|---|
| Operating Weight | 5930.5lb | 2690kg |
| Breakout Force, Bucket Cylinder | 5328lb | 23.7kN |
| Breakout Force, Lift Cylinder | 2630.3lb | 11.7kN |
| Rated Operating Load, 50% Tip | 1803.4lb | 818kg |
04 Power Train Specification
| Travel Speed, Low Range | 7.4mph | 12km/h |
|---|---|---|
| Travel Speed, High Range | 10.8mph | 17.4km/h |
05 Weights Specification
| Operating Weight | 6243.5lb | 2832kg |
|---|---|---|
| Shipping | 5941.5lb | 2695kg |
06 Hydraulic System Specification
| Standard Pump Flow | 20.6gal/min | 78L/min |
|---|---|---|
| Optional High Flow | 30.7gal/min | 116.3L/min |
| Relief Valve Pressure | 3046psi | 21001.5kPa |
07 Dimensions Dimensions
| Ground Clearance | 7.01in | 178mm |
|---|---|---|
| Wheelbase | 3.71ft in | 1128mm |
| Bucket Hinge Pin | 120in | 3048mm |
| Dump Angle | 52 degrees | |
| Angle Of Departure | 23degrees | |
| Rollback, Bucket At Full Height | 88degrees | |
| Rollback, Bucket On Ground | 35degrees | |
| Top Of Rops | 77.72in | 1974mm |
| Overall Width | 5.51ft in | 1678mm |
| Bottom Of Level Bucket, Fully Raised | 113.27in | 2877mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.