Specification sheet Skid Steer Loader Ref new-holland-l215-skid-steer-loader
New Holland L215
The New Holland L215 is a skid steer loader with an operating weight of 5,370.47 lb (2,436 kg), and a 49 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
5,370.47lb
2,436kg
Engine power
49hp
36.54kW
Net Power ◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the New Holland L215 sits below the median for its class:
- Operating weight 5,370 lb lighter than 82% (n=334)
- Engine power 49 hp less powerful than 75% (n=335)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | ISM | |
| Engine Model | N844T | |
| Gross Power | 52hp | 38.8kw |
| Net Power | 49hp | 36.6kw |
| Power Measured @ | 2900rpm | |
| Max Torque | 109.2lb ft | 148Nm |
| Torque Measured @ | 1750rpm | |
| Displacement | 122.1cu in | 2L |
| Bore | 3.4in | 84mm |
| Stroke | 3.6in | 90mm |
02 Operational Specification
| Operational Weight | 5370.5lb | 2436kg |
|---|---|---|
| Shipping Weight - Empty | 5070.7lb | 2300kg |
| Fuel Capacity | 16gal | 60.5L |
| Engine Oil Fluid Capacity | 2gal | 7.5L |
| Hydraulic System Fluid Capacity | 4gal | 15.2L |
| Chain Box Fluid Capacity - Each Side | 1.7gal | 6.3L |
| Tire Size | 10 X 16.5 |
03 Loader Specification
| Tipping Load (Iso 14397) | 3000.5lb | 1361kg |
|---|
04 Hydraulic Specification
| Pump Type | Gear | |
|---|---|---|
| Pump Flow Capacity | 15.6gal/min | 59L/min |
| Relief Valve Pressure | 3000psi | 20684.3kPa |
| Raise Time | 3.4sec | |
| Dump Time | 1.9sec | |
| Lower Time | 2.1sec | |
| Displacement-Standard Aux | 1.3cu in | 0.1L |
05 Dimensions Dimensions
| Length With Bucket | 9.94ft in | 3028mm |
|---|---|---|
| Width Over Tires | 4.1ft in | 1248mm |
| Ground Clearance | 7.01in | 178mm |
| Wheelbase | 3.09ft in | 941mm |
| Length W/O Bucket | 7.99ft in | 2435mm |
| Reach At Max Lift And Dump | 18.47in | 469mm |
| Height To Top Of Rops | 75.56in | 1919mm |
| Bucket Hinge Pin Fully Raised | 9333.99ft in | 2845m |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.