Specification sheet Skid Steer Loader Ref new-holland-l190-skid-steer-loader

New Holland L190

The New Holland L190 is a skid steer loader with an operating weight of 7,755.87 lb (3,518 kg), a 74 hp engine, a rated operating capacity of 2,800 lb (1,270 kg), and a tipping load of 5,600 lb (2,540.12 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
7,755.87lb
3,518kg
Engine power
74hp
55kW
Net Power
Rated operating capacity
2,800lb
1,270kg
Tipping load
5,600lb † — value reconstructed from related published figures
2,540.12kg
Bucket capacity
1yd³
0.8m³

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the New Holland L190 sits above the median for its class:

  • Operating weight 7,760 lb heavier than 74% (n=334)
  • Engine power 74 hp more powerful than 69% (n=335)
  • Rated operating capacity 2,800 lb higher-rated than 88% (n=288)

◇Scale drawingdrawn to scale · mm

2021B257C3701A
Side elevation
2021B1810D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2249
Engine Model 445M2
Gross Power 80hp 60kw
Net Power 74hp 55kw
Power Measured @ 2300rpm
Displacement 274cu in 4.5L

02 Operational Specification

Operational Weight 7755.9lb 3518kg
Fuel Capacity 21.5gal 81.4L
Cooling System Fluid Capacity 4.5gal 17L
Engine Oil Fluid Capacity 3.2gal 12L
Max Speed 11.4mph 18.3km/h
Hydraulic System Fluid Capacity 15gal 56.8L
Chain Box Fluid Capacity - Each Side 3gal 11.3L
Operating Speed 7mph 11.2km/h
Tire Size 14.00X17.5
Operating Voltage 12V
Alternator Supplied Amperage 95amps

03 Loader Specification

Breakout Force 7670lb 3479kg
Operating Load Rating 2800lb 1270kg
Bucket Capacity 1yd3 0.8m3

04 Hydraulic Specification

Pump Type Gear type
Pump Flow Capacity 21.9gal/min 83L/min

05 Dimensions Dimensions

Length With Bucket 12.15ft in 3701mm
Width Over Tires 5.94ft in 1810mm
Ground Clearance 10.12in 257mm
Height To Top Of Cab 6.64ft in 2021mm
Wheelbase 4.3ft in 1310mm
Clearance At Max Lift And Dump 12.75ft in 3885mm
Reach At Max Lift And Dump 32.01in 813mm
Turning Radius From Center - Inc Bucket 80.71in 2050mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.