Specification sheet Skid Steer Loader Ref new-holland-l185-skid-steer-loader

New Holland L185

The New Holland L185 is a skid steer loader with an operating weight of 7,098.89 lb (3,220 kg), a 72 hp engine, a rated operating capacity of 2,500.05 lb (1,134 kg), and a tipping load of 5,000.1 lb (2,268.01 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
7,098.89lb
3,220kg
Engine power
72hp
54kW
Net Power
Rated operating capacity
2,500.05lb
1,134kg
Tipping load
5,000.1lb † — value reconstructed from related published figures
2,268.01kg
Bucket capacity
0.7yd³
0.5m³

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the New Holland L185 sits above the median for its class:

  • Operating weight 7,100 lb heavier than 61% (n=334)
  • Engine power 72 hp more powerful than 63% (n=335)
  • Rated operating capacity 2,500 lb higher-rated than 81% (n=288)

◇Scale drawingdrawn to scale · mm

1960B200C3520A
Side elevation
1960B1810D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2249
Engine Model F5CE5454
Gross Power 78hp 58kw
Net Power 72hp 54kw
Power Measured @ 2300rpm
Displacement 195.3cu in 3.2L

02 Operational Specification

Operational Weight 7098.9lb 3220kg
Fuel Capacity 18gal 68.1L
Cooling System Fluid Capacity 4.5gal 17L
Engine Oil Fluid Capacity 2.2gal 8L
Max Speed 6.9mph 11.1km/h
Hydraulic System Fluid Capacity 15gal 56.8L
Chain Box Fluid Capacity - Each Side 2.7gal 10.2L
Operating Speed 11.3mph 18.1km/h
Tire Size 12.00X16.5
Operating Voltage 12V
Alternator Supplied Amperage 95amps

03 Loader Specification

Breakout Force 7669.9lb 3479kg
Operating Load Rating 2500.1lb 1134kg
Bucket Capacity 0.7yd3 0.5m3

04 Hydraulic Specification

Pump Type Gear type
Pump Flow Capacity 19.3gal/min 73.1L/min

05 Dimensions Dimensions

Length With Bucket 11.55ft in 3520mm
Width Over Tires 5.94ft in 1810mm
Ground Clearance 7.88in 200mm
Height To Top Of Cab 6.44ft in 1960mm
Wheelbase 4.01ft in 1220mm
Clearance At Max Lift And Dump 12.6ft in 3840mm
Reach At Max Lift And Dump 32.68in 830mm
Turning Radius From Center - Inc Bucket 75.6in 1920mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.