Specification sheet Skid Steer Loader Ref new-holland-l175-skid-steer-loader

New Holland L175

The New Holland L175 is a skid steer loader with an operating weight of 6,230.27 lb (2,826 kg), a 56.33 hp engine, a rated operating capacity of 2,000 lb (907 kg), and a tipping load of 4,000 lb (1,814.37 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
6,230.27lb
2,826kg
Engine power
56.33hp
42kW
Net Power
Rated operating capacity
2,000lb
907kg
Tipping load
4,000lb † — value reconstructed from related published figures
1,814.37kg
Bucket capacity
0.7yd³
0.5m³

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the New Holland L175 sits below the median for its class:

  • Operating weight 6,230 lb lighter than 63% (n=334)
  • Engine power 56 hp less powerful than 62% (n=335)
  • Rated operating capacity 2,000 lb higher-rated than 56% (n=288)

◇Scale drawingdrawn to scale · mm

1930B210C3290A
Side elevation
1930B1800D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2249
Engine Model N844LT
Gross Power 60.4hp 45kw
Net Power 56.4hp 42kw
Power Measured @ 2900rpm
Displacement 134.3cu in 2.2L

02 Operational Specification

Operational Weight 6230.3lb 2826kg
Fuel Capacity 14.4gal 54.5L
Cooling System Fluid Capacity 4.5gal 17L
Engine Oil Fluid Capacity 2.2gal 8L
Max Speed 10.1mph 16.1km/h
Hydraulic System Fluid Capacity 8.6gal 32.6L
Chain Box Fluid Capacity - Each Side 1.6gal 5.7L
Operating Speed 6mph 9.5km/h
Tire Size 12.00X16.5
Operating Voltage 12V
Alternator Supplied Amperage 55amps

03 Loader Specification

Breakout Force 4312lb 1956kg
Operating Load Rating 2000lb 907kg
Bucket Capacity 0.7yd3 0.5m3

04 Hydraulic Specification

Pump Type Gear type
Pump Flow Capacity 17.2gal/min 65.2L/min
Relief Valve Pressure 2600psi 17926.4kPa

05 Dimensions Dimensions

Length With Bucket 10.8ft in 3290mm
Width Over Tires 5.91ft in 1800mm
Ground Clearance 8.27in 210mm
Height To Top Of Cab 6.34ft in 1930mm
Wheelbase 3.55ft in 1080mm
Clearance At Max Lift And Dump 12.21ft in 3720mm
Reach At Max Lift And Dump 29.14in 740mm
Turning Radius From Center - Inc Bucket 70.08in 1780mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.