Specification sheet Skid Steer Loader Ref new-holland-l170-skid-steer-loader

New Holland L170

The New Holland L170 is a skid steer loader with an operating weight of 5,540.22 lb (2,513 kg), a 50 hp engine, a rated operating capacity of 1,765.91 lb (801 kg), and a tipping load of 3,529.7 lb (1,601.05 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
5,540.22lb
2,513kg
Engine power
50hp
37kW
Net Power
Rated operating capacity
1,765.91lb
801kg
Tipping load
3,529.7lb † — value reconstructed from related published figures
1,601.05kg
Bucket capacity
0.6yd³
0.5m³

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the New Holland L170 sits below the median for its class:

  • Operating weight 5,540 lb lighter than 77% (n=334)
  • Engine power 50 hp less powerful than 72% (n=335)
  • Rated operating capacity 1,770 lb lower-rated than 56% (n=288)

◇Scale drawingdrawn to scale · mm

1900B190C3180A
Side elevation
1900B1670D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2249
Engine Model N844T
Gross Power 52hp 39kw
Net Power 50hp 37kw
Displacement 121.8cu in 2L

02 Operational Specification

Operational Weight 5540.3lb 2513kg
Fuel Capacity 14.4gal 54.5L
Cooling System Fluid Capacity 2.7gal 10.2L
Engine Oil Fluid Capacity 1.8gal 6.5L
Hydraulic System Fluid Capacity 8.6gal 32.6L
Max Speed 7.3mph 11.8km/h
Chain Box Fluid Capacity - Each Side 3.3gal 12.3L
Tire Size 10.00X16.5
Operating Voltage 12V
Alternator Supplied Amperage 40amps

03 Loader Specification

Breakout Force 3719.2lb 1687kg
Operating Load Rating 1766lb 801kg
Bucket Capacity 0.6yd3 0.5m3

04 Hydraulic Specification

Pump Type Gear type
Pump Flow Capacity 17.2gal/min 65.2L/min
Relief Valve Pressure 2500psi 17236.9kPa

05 Dimensions Dimensions

Length With Bucket 10.44ft in 3180mm
Width Over Tires 5.48ft in 1670mm
Ground Clearance 7.49in 190mm
Height To Top Of Cab 6.24ft in 1900mm
Wheelbase 3.55ft in 1080mm
Clearance At Max Lift And Dump 11.68ft in 3560mm
Reach At Max Lift And Dump 29.14in 740mm
Turning Radius From Center - Inc Bucket 66.93in 1700mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.