Specification sheet Skid Steer Loader Ref new-holland-l160-skid-steer-loader

New Holland L160

The New Holland L160 is a skid steer loader with an operating weight of 5,533.61 lb (2,510 kg), a 44.26 hp engine, a rated operating capacity of 1,600 lb (726 kg), and a tipping load of 3,200 lb (1,451.5 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
5,533.61lb
2,510kg
Engine power
44.26hp
33kW
Net Power
Rated operating capacity
1,600lb
726kg
Tipping load
3,200lb † — value reconstructed from related published figures
1,451.5kg
Bucket capacity
0.5yd³
0.4m³

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the New Holland L160 sits below the median for its class:

  • Operating weight 5,530 lb lighter than 78% (n=334)
  • Engine power 44 hp less powerful than 84% (n=335)
  • Rated operating capacity 1,600 lb lower-rated than 67% (n=288)

◇Scale drawingdrawn to scale · mm

1900B190C3180A
Side elevation
1900B1670D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2249
Engine Model N844
Gross Power 45.6hp 34kw
Net Power 44.3hp 33kw
Power Measured @ 2900rpm
Displacement 119.4cu in 2L

02 Operational Specification

Operational Weight 5533.7lb 2510kg
Fuel Capacity 14.4gal 54.5L
Cooling System Fluid Capacity 2.7gal 10.2L
Engine Oil Fluid Capacity 1.8gal 6.5L
Max Speed 7.4mph 11.8km/h
Hydraulic System Fluid Capacity 8.7gal 32.6L
Chain Box Fluid Capacity - Each Side 3.3gal 12.3L
Tire Size 10.00 x 16.5
Operating Voltage 12V
Alternator Supplied Amperage 40amps

03 Loader Specification

Breakout Force 3712lb 1687kg
Operating Load Rating 1600lb 726kg
Bucket Capacity 0.5yd3 0.4m3

04 Hydraulic Specification

Pump Type Gear type
Pump Flow Capacity 15.1gal/min 57.2L/min

05 Dimensions Dimensions

Length With Bucket 10.44ft in 3180mm
Width Over Tires 5.48ft in 1670mm
Ground Clearance 7.49in 190mm
Height To Top Of Cab 6.24ft in 1900mm
Wheelbase 3.55ft in 1080mm
Clearance At Max Lift And Dump 11.68ft in 3560mm
Reach At Max Lift And Dump 29.14in 740mm
Turning Radius From Center - Inc Bucket 66.93in 1700mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.