New Holland E9SR
The New Holland E9SR is a mini excavator with an operating weight of 2,337 lb, a 8 hp engine, and a dig depth of 5.75 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the New Holland E9SR sits at the compact end of its class:
- Operating weight 2,340 lb lighter than 96% (n=438)
- Engine power 8 hp less powerful than 99% (n=448)
- Dig depth 5.8 ft shallower-digging than 96% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 9.42ft in | 2,871mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 10.37ft in | 3,161mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.11ft in | 2,472mm‖ — metric converted from the published imperial value |
| Max Loading Height | 7.55ft in | 2,301mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 10.54ft in | 3,213mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 4.66ft in | 1,420mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 5.75ft in | 1,753mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | stick 925mm |
02 Dimensions Specification
| Width To Outside Of Tracks | 3.22ft in | 981mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 3.32ft in | 1,012mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.11ft in | 2,472mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 1.61ft in | 491mm‖ — metric converted from the published imperial value |
| Removal Counterweight Clearance | 1.25ft in | 381mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 7.09in | 180mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 2.49mph | 4.01km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Number Of Cylinders | 2 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 2TNE68-YB | |
| Net Power | 8hp | 6kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2000rpm | |
| Displacement | 31.9cu in | 523cm3‖ — metric converted from the published imperial value |
| Aspiration | Natural |
05 Operational Specification
| Operating Weight | 2337lb | 1,060kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 2.4gal | 9.1l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 2.7gal | 10l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V | |
| Hydraulic System Relief Valve Pressure | 2987.8psi | 20,600kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 5.9gal/min | 22l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 9rpm |
|---|
07 Buckets Specification
| Reference Bucket Capacity | 0.1yd3 | |
|---|---|---|
| Minimum Bucket Capacity | 0.1yd3 | |
| Maximum Bucket Capacity | 0.1yd3 |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.