New Holland E37C
The New Holland E37C is a mini excavator with a dig depth of 10.3 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the New Holland E37C sits above the median for its class:
- Dig depth 10.3 ft deeper-digging than 67% (n=426)
Not positioned on operating weight, engine power — withheld or unpublished for this machine.
01 Boom/Stick Option (Hex) 1 Specification
| Max Vertical Wall Digging Depth | 7.2ft in | 2,195mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Digging Depth | 10.3ft in | 3,139mm‖ — metric converted from the published imperial value |
| Max Digging Reach | 17.5ft in | 5,334mm‖ — metric converted from the published imperial value |
| Max Digging Reach On Ground | 17.11ft in | 5,215mm‖ — metric converted from the published imperial value |
| Bucket Digging Force | 6900lb | 3,130kg‖ — metric converted from the published imperial value |
| Overall Reach Height | 15.9ft in | 4,846mm‖ — metric converted from the published imperial value |
| Arm Digging Force | 4390lb | 1,991kg‖ — metric converted from the published imperial value |
| Max.Dumping Height | 11.3ft in | 3,444mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
03 Engine Specification
| Emissions Certification | Tier 4 Final | |
|---|---|---|
| Fuel | Diesel | |
| Cylinders | 3 | |
| Gross Horsepower – Sae J1995 | 24.4hp | 18.2kw‖ — metric converted from the published imperial value |
| Fuel Injection | Mechanical with electronic governor | |
| Cooling Method | Water-cooled | |
| Engine Model | Yanmar 3TNV88F-ESHYB | |
| Displacement | 100.2cu in | 1,642cm3‖ — metric converted from the published imperial value |
04 Drive Train Specification
| Travel Speeds - 1st | 1.6mph | 2.6km/h‖ — metric converted from the published imperial value |
|---|---|---|
| Travel Speeds - 2nd | 2.6mph | 4.2km/h‖ — metric converted from the published imperial value |
| Maximum Traction Force | 6834.2lb | 3,099.9kg‖ — metric converted from the published imperial value |
| Gradeability | 30degrees |
05 Capacities Specification
| Engine Oil W/ Filter Change | 1.8gal | 6.8l‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic Tank - Refill Capacity | 9.8gal | 37l‖ — metric converted from the published imperial value |
| Hydraulic Tank - Total System | 15.9gal | 60.2l‖ — metric converted from the published imperial value |
| Fuel Tank | 10.6gal | 40.1l‖ — metric converted from the published imperial value |
| Radiator | 1.5gal | 5.7l‖ — metric converted from the published imperial value |
06 Performance Specification
| Maximum Dig Radius | 209.3in | 5,316mm‖ — metric converted from the published imperial value |
|---|---|---|
| Dig Radius At Groundline | 204.8in | 5,202mm‖ — metric converted from the published imperial value |
| Maximum Dig Depth | 123.5in | 3,137mm‖ — metric converted from the published imperial value |
| Vertical Straight Wall Dig Depth | 86.3in | 2,192mm‖ — metric converted from the published imperial value |
07 Blade Specification
| Backfill Blade Height | 14.6in | 371mm‖ — metric converted from the published imperial value |
|---|---|---|
| Backfill Blade Width | 68.6in | 1,742mm‖ — metric converted from the published imperial value |
| Backfill Blade Dig Depth | 14.8in | 376mm‖ — metric converted from the published imperial value |
| Backfill Blade Rise Above Ground | 15.4in | 391mm‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.