New Holland E35SR
The New Holland E35SR is a mini excavator with an operating weight of 8,223.3 lb, a 24.2 hp engine, and a dig depth of 11.09 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the New Holland E35SR sits above the median for its class:
- Operating weight 8,220 lb heavier than 76% (n=438)
- Engine power 24 hp more powerful than 52% (n=448)
- Dig depth 11.1 ft deeper-digging than 79% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 15.49ft in | 4,721mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 11ft in | 3,353mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 15.29ft in | 4,660mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11.09ft in | 3,380mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | standard |
02 Dimensions Specification
| Width To Outside Of Tracks | 5.58ft in | 1,701mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 5.58ft in | 1,701mm‖ — metric converted from the published imperial value |
| Ground Clearance | 0.47ft in | 143mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 2.79ft in | 850mm‖ — metric converted from the published imperial value |
03 Engine Specification
| Engine Make | 2348 | |
|---|---|---|
| Gross Power | 24.2hp | 18kw‖ — metric converted from the published imperial value |
04 Operational Specification
| Operating Weight | 8223.3lb | 3,730kg‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic System Relief Valve Pressure | 3277.9psi | 22,600kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 18.5gal/min | 70l/min‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.