New Holland E30C
The New Holland E30C is a mini excavator.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classnot positioned
None of the positionable specs are published for this machine.
01 Dimensions Specification
02 Engine Specification
| Emissions Certification | Tier 4 Final | |
|---|---|---|
| Fuel | Diesel | |
| Cylinders | 3 | |
| Gross Horsepower – Sae J1995 | 24.8hp | 18.5kw‖ — metric converted from the published imperial value |
| Fuel Injection | Mechanical | |
| Cooling Method | Water-cooled | |
| Engine Model | Kubota D1305 | |
| Displacement | 77cu in | 1,262cm3‖ — metric converted from the published imperial value |
03 Drive Train Specification
| Travel Speeds - 1st | 1.5mph | 2.4km/h‖ — metric converted from the published imperial value |
|---|---|---|
| Travel Speeds - 2nd | 2.7mph | 4.3km/h‖ — metric converted from the published imperial value |
| Maximum Traction Force | 4800lb | 2,177kg‖ — metric converted from the published imperial value |
| Gradeability | 30degrees |
04 Capacities Specification
| Engine Oil W/ Filter Change | 1.6gal | 6.1l‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic Tank - Refill Capacity | 7.2gal | 27l‖ — metric converted from the published imperial value |
| Hydraulic Tank - Total System | 14.6gal | 55.3l‖ — metric converted from the published imperial value |
| Fuel Tank | 8gal | 30l‖ — metric converted from the published imperial value |
| Radiator | 1.4gal | 5.3l‖ — metric converted from the published imperial value |
05 Performance Specification
| Maximum Dig Radius | 183.1in | 4,651mm‖ — metric converted from the published imperial value |
|---|---|---|
| Dig Radius At Groundline | 177.8in | 4,516mm‖ — metric converted from the published imperial value |
| Maximum Dig Depth | 98.5in | 2,502mm‖ — metric converted from the published imperial value |
| Vertical Straight Wall Dig Depth | 82.1in | 2,085mm‖ — metric converted from the published imperial value |
06 Blade Specification
| Backfill Blade Height | 13in | 330mm‖ — metric converted from the published imperial value |
|---|---|---|
| Backfill Blade Width | 61.1in | 1,552mm‖ — metric converted from the published imperial value |
| Backfill Blade Dig Depth | 17.8in | 452mm‖ — metric converted from the published imperial value |
| Backfill Blade Rise Above Ground | 14.6in | 371mm‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.