New Holland E20SR
The New Holland E20SR is a mini excavator with an operating weight of 4,453.4 lb, and a 14.8 hp engine.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the New Holland E20SR sits below the median for its class:
- Operating weight 4,450 lb lighter than 70% (n=438)
- Engine power 15 hp less powerful than 90% (n=448)
Not positioned on dig depth — withheld or unpublished for this machine.
01 Dimensions Specification
| Width To Outside Of Tracks | 4.76ft in | 1,451mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 4.57ft in | 1,393mm‖ — metric converted from the published imperial value |
| Ground Clearance | 0.4ft in | 122mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 2.38ft in | 725mm‖ — metric converted from the published imperial value |
02 Undercarriage Specification
| Shoe Size | 9.06in | 230mm‖ — metric converted from the published imperial value |
|---|
03 Engine Specification
| Engine Make | 2348 | |
|---|---|---|
| Gross Power | 14.8hp | 11kw‖ — metric converted from the published imperial value |
04 Operational Specification
| Operating Weight | 4453.4lb | 2,020kg‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic System Relief Valve Pressure | 3335.9psi | 23,000kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 10.6gal/min | 40.1l/min‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.