New Holland E18SR
The New Holland E18SR is a mini excavator with an operating weight of 3,747.9 lb, a 15.2 hp engine, and a dig depth of 7.06 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the New Holland E18SR sits below the median for its class:
- Operating weight 3,750 lb lighter than 80% (n=438)
- Engine power 15 hp less powerful than 85% (n=448)
- Dig depth 7.1 ft shallower-digging than 88% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 11.23ft in | 3,423mm‖ — metric converted from the published imperial value |
|---|---|---|
| Shipping Height Of Unit | 7.71ft in | 2,350mm‖ — metric converted from the published imperial value |
| Max Loading Height | 8.7ft in | 2,652mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 12.77ft in | 3,892mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 5.45ft in | 1,661mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 7.06ft in | 2,152mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 4.34ft in | 1,323mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 3.97ft in | 1,210mm‖ — metric converted from the published imperial value |
| Ground Clearance | 0.56ft in | 171mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 2.17ft in | 661mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 9.06in | 230mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 2.49mph | 4.01km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2251 | |
| Engine Model | L3EW 23LKBS | |
| Gross Power | 15.2hp | 11.3kw‖ — metric converted from the published imperial value |
| Displacement | 58.1cu in | 952cm3‖ — metric converted from the published imperial value |
05 Operational Specification
| Operating Weight | 3747.9lb | 1,700kg‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic System Relief Valve Pressure | 3132.9psi | 21,601kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 8.3gal/min | 31l/min‖ — metric converted from the published imperial value |
06 Buckets Specification
| Reference Bucket Capacity | 0.1yd3 |
|---|
?Questions & answersfrom this machine's data
- How much does a New Holland E18SR mini excavator weigh?
- A New Holland E18SR mini excavator has an operating weight of 3,747.9 lb (1,700 kg). The metric figure is converted from the published imperial value.
- What engine does a New Holland E18SR mini excavator have?
- A New Holland E18SR mini excavator is powered by a L3EW 23LKBS engine producing 15.2 hp (11.3 kW). The metric figure is converted from the published imperial value.
- How deep can a New Holland E18SR mini excavator dig?
- A New Holland E18SR mini excavator has a maximum dig depth of 7.1 ft (2,152 mm). The metric figure is converted from the published imperial value.
- What is the tail swing radius of a New Holland E18SR mini excavator?
- A New Holland E18SR mini excavator has a tail swing radius of 2.2 ft (661 mm). The metric figure is converted from the published imperial value.
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.