New Holland C238
The New Holland C238 is a skid steer loader with an operating weight of 10,099.4 lb (4,581 kg), and a tipping load of 7,599.4 lb (3,447 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the New Holland C238 sits at the heavy end of its class:
- Operating weight 10,100 lb heavier than 98% (n=334)
Not positioned on engine power, rated operating capacity — withheld or unpublished for this machine.
01 Engine Specification
| Horsepower, Net-Sae J1349 | 84hp | 62.7kw |
|---|---|---|
| Fuel Injection | HPCR Direct | |
| Horsepower Per Sae J1349 Gross | 90hp | 67.2kw |
| Engine Model | F5BFL413E*B002 | |
| Max Torque | 282lb ft | 382.4Nm |
| Torque Measured @ | 1400rpm | |
| Displacement | 207.5cu in | 3.4L |
| Bore | 3.9in | 99mm |
| Stroke | 4.4in | 110mm |
02 Capacities Specification
| Engine Oil W/ Filter Change | 2.3gal | 8.5L |
|---|---|---|
| Fuel Tank | 25.5gal | 96.5L |
| System Capacity With Filter | 11.8gal | 44.5L |
03 Performance Specification
| Rated Operating Load, 35% Tip | 2665.4lb | 1209kg |
|---|---|---|
| Tipping Load | 7599.4lb | 3447kg |
| Operating Weight | 10099.4lb | 4581kg |
| Breakout Force, Bucket Cylinder | 7351.3lb | 32.7kN |
| Breakout Force, Lift Cylinder | 6114.9lb | 27.2kN |
| Rated Operating Load, 50% Tip | 3798.6lb | 1723kg |
04 Power Train Specification
| Travel Speed, Low Range | 5.1mph | 8.2km/h |
|---|---|---|
| Travel Speed, High Range | 7.6mph | 12.2km/h |
05 Hydraulic System Specification
| Optional High Flow | 37.6gal/min | 142.4L/min |
|---|---|---|
| Relief Valve Pressure | 3046psi | 21001.5kPa |
| Pump Flow | 24.2gal/min | 91.7L/min |
06 Dimensions Dimensions
| Ground Clearance | 9.57in | 243mm |
|---|---|---|
| Bottom Of Level Bucket, Fully Raised | 124.22in | 3155mm |
| Bucket Hinge Pin | 131.11in | 3330mm |
| Clearance Circle Rear | 71.23in | 1809mm |
| Clearance Circle Without Bucke | 56.23in | 1428mm |
| Dump Reach - General Purpose | 34.45in | 875mm |
| Ground Pressure | 4.6psi | 31.72kPa |
| Overall Width | 76in | 1930.4mm |
| Rollback, Bucket At Full Height | 84.8degrees | |
| Rollback, Bucket On Ground | 32.8degrees | |
| Top Of Rops | 80.44in | 2043mm |
| Angle Of Departure | 32degrees | |
| Track On Ground | 64.53in | 1639mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.