New Holland C237
The New Holland C237 is a skid steer loader with an operating weight of 9,149.2 lb (4,150 kg), and a tipping load of 7,401 lb (3,357 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the New Holland C237 sits at the heavy end of its class:
- Operating weight 9,150 lb heavier than 93% (n=334)
Not positioned on engine power, rated operating capacity — withheld or unpublished for this machine.
01 Engine Specification
| Horsepower, Net-Sae J1349 | 68hp | 50.8kw |
|---|---|---|
| Fuel Injection | HPCR Direct | |
| Horsepower Per Sae J1349 Gross | 74hp | 55.2kw |
| Engine Model | F5BFL463A*F001 | |
| Max Torque | 232lb ft | 314.6Nm |
| Torque Measured @ | 1400rpm | |
| Displacement | 207.5cu in | 3.4L |
| Bore | 3.9in | 99mm |
| Stroke | 4.4in | 110mm |
02 Performance Specification
| Rated Operating Load, 35% Tip | 2597.1lb | 1178kg |
|---|---|---|
| Tipping Load | 7401lb | 3357kg |
| Operating Weight | 9149.2lb | 4150kg |
| Breakout Force, Bucket Cylinder | 8767.6lb | 39kN |
| Breakout Force, Lift Cylinder | 6294.7lb | 28kN |
| Rated Operating Load, 50% Tip | 3699.4lb | 1678kg |
03 Power Train Specification
| Travel Speed, Low Range | 5.1mph | 8.2km/h |
|---|---|---|
| Travel Speed, High Range | 8.1mph | 12.9km/h |
04 Hydraulic System Specification
| Optional High Flow | 37.6gal/min | 142.4L/min |
|---|---|---|
| Relief Valve Pressure | 3046psi | 21001.5kPa |
| Pump Flow | 24.2gal/min | 91.7L/min |
05 Dimensions Dimensions
| Ground Clearance | 9.5in | 241.3mm |
|---|---|---|
| Bottom Of Level Bucket, Fully Raised | 124.8in | 3169.92mm |
| Bucket Hinge Pin | 131.6in | 3342.64mm |
| Clearance Circle Rear | 67in | 1701.8mm |
| Clearance Circle Without Bucke | 58.5in | 1485.9mm |
| Dump Reach - General Purpose | 35.1in | 891.54mm |
| Ground Pressure | 4.2psi | 28.96kPa |
| Overall Width | 76in | 1930.4mm |
| Rollback, Bucket At Full Height | 86degrees | |
| Rollback, Bucket On Ground | 34.21degrees | |
| Top Of Rops | 80.41in | 2042.16mm |
| Angle Of Departure | 32degrees | |
| Track On Ground | 64.5in | 1638.3mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.