New Holland C232
The New Holland C232 is a skid steer loader with an operating weight of 9,634.3 lb (4,370 kg), and a tipping load of 6,397.9 lb (2,902 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the New Holland C232 sits at the heavy end of its class:
- Operating weight 9,630 lb heavier than 96% (n=334)
Not positioned on engine power, rated operating capacity — withheld or unpublished for this machine.
01 Engine Specification
| Horsepower, Net-Sae J1349 | 68hp | 50.8kw |
|---|---|---|
| Fuel Injection | HPCR Direct | |
| Horsepower Per Sae J1349 Gross | 74hp | 55.2kw |
| Engine Model | F5H FL463A*F001 | |
| Max Torque | 232lb ft | 314.6Nm |
| Torque Measured @ | 1400rpm | |
| Displacement | 207.5cu in | 3.4L |
| Bore | 3.9in | 99mm |
| Stroke | 4.4in | 110mm |
02 Capacities Specification
| Engine Oil W/ Filter Change | 2.3gal | 8.5L |
|---|---|---|
| Fuel Tank | 25.5gal | 96.5L |
| System Capacity With Filter | 11.8gal | 44.5L |
03 Performance Specification
| Rated Operating Load, 35% Tip | 2244.4lb | 1018kg |
|---|---|---|
| Tipping Load | 6397.9lb | 2902kg |
| Operating Weight | 9634.3lb | 4370kg |
| Breakout Force, Bucket Cylinder | 7508.7lb | 33.4kN |
| Breakout Force, Lift Cylinder | 4833.4lb | 21.5kN |
| Rated Operating Load, 50% Tip | 3199lb | 1451kg |
04 Power Train Specification
| Travel Speed, Low Range | 5.1mph | 8.2km/h |
|---|---|---|
| Travel Speed, High Range | 7.6mph | 12.2km/h |
05 Hydraulic System Specification
| Optional High Flow | 37.6gal/min | 142.4L/min |
|---|---|---|
| Relief Valve Pressure | 3046psi | 21001.5kPa |
| Pump Flow | 24.2gal/min | 91.7L/min |
06 Dimensions Dimensions
| Ground Clearance | 9.57in | 243mm |
|---|---|---|
| Bottom Of Level Bucket, Fully Raised | 124.22in | 3155mm |
| Bucket Hinge Pin | 131.11in | 3330mm |
| Clearance Circle Rear | 70.44in | 1789mm |
| Clearance Circle Without Bucke | 56.23in | 1428mm |
| Dump Reach - General Purpose | 34.45in | 875mm |
| Ground Pressure | 4.2psi | 28.96kPa |
| Overall Width | 75.99in | 1930mm |
| Rollback, Bucket At Full Height | 84.8degrees | |
| Rollback, Bucket On Ground | 32.8degrees | |
| Top Of Rops | 80.44in | 2043mm |
| Angle Of Departure | 32degrees | |
| Track On Ground | 64.53in | 1639mm |
?Questions & answersfrom this machine's data
- How much does a New Holland C232 skid steer weigh?
- A New Holland C232 skid steer has an operating weight of 9,634.3 lb (4,370 kg).
- What is the ground clearance of a New Holland C232 skid steer?
- A New Holland C232 skid steer has a ground clearance of 9.6 in (243 mm).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.