New Holland C227
The New Holland C227 is a skid steer loader with an operating weight of 8,267.4 lb (3,750 kg), and a tipping load of 5,399.2 lb (2,449 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the New Holland C227 sits at the heavy end of its class:
- Operating weight 8,270 lb heavier than 86% (n=334)
Not positioned on engine power, rated operating capacity — withheld or unpublished for this machine.
01 Engine Specification
| Horsepower, Net-Sae J1349 | 68hp | 50.8kw |
|---|---|---|
| Fuel Injection | HPCR Direct | |
| Horsepower Per Sae J1349 Gross | 74hp | 55.2kw |
| Engine Model | F5H FL463A | |
| Max Torque | 232lb ft | 314.6Nm |
| Torque Measured @ | 1400rpm | |
| Displacement | 207.5cu in | 3.4L |
| Bore | 3.9in | 99mm |
| Stroke | 4.3in | 109mm |
02 Capacities Specification
| Engine Oil W/ Filter Change | 2.3gal | 8.5L |
|---|---|---|
| Fuel Tank | 19.6gal | 73.9L |
| System Capacity With Filter | 8.6gal | 32.2L |
03 Performance Specification
| Rated Operating Load, 35% Tip | 4166.8lb | 1890kg |
|---|---|---|
| Tipping Load | 5399.2lb | 2449kg |
| Operating Weight | 8267.4lb | 3750kg |
| Breakout Force, Bucket Cylinder | 7270lb | 32.4kN |
| Breakout Force, Lift Cylinder | 6069.9lb | 27kN |
| Rated Operating Load, 50% Tip | 2700.7lb | 1225kg |
04 Power Train Specification
| Travel Speed, Low Range | 5.1mph | 8.2km/h |
|---|---|---|
| Travel Speed, High Range | 7.6mph | 12.2km/h |
05 Hydraulic System Specification
| Optional High Flow | 324gal/min | 1226.5L/min |
|---|---|---|
| Relief Valve Pressure | 3046psi | 21001.5kPa |
| Pump Flow | 24.2gal/min | 91.7L/min |
06 Dimensions Dimensions
| Ground Clearance | 8in | 203mm |
|---|---|---|
| Bottom Of Level Bucket, Fully Raised | 105.08in | 2669mm |
| Bucket Hinge Pin | 123in | 3124mm |
| Clearance Circle Rear | 62.96in | 1599mm |
| Clearance Circle Without Bucke | 50.75in | 1289mm |
| Dump Reach - General Purpose | 22.37in | 568mm |
| Ground Pressure | 9psi | 62.06kPa |
| Overall Width | 65.99in | 1676mm |
| Rollback, Bucket At Full Height | 99degrees | |
| Rollback, Bucket On Ground | 31degrees | |
| Top Of Rops | 78.67in | 1998mm |
| Angle Of Departure | 32degrees | |
| Track On Ground | 55.87in | 1419mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.