Nagano NS45
The Nagano NS45 is a mini excavator with an operating weight of 9,832.7 lb, a 43.2 hp engine, and a dig depth of 11.77 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Nagano NS45 sits at the heavy end of its class:
- Operating weight 9,830 lb heavier than 87% (n=438)
- Engine power 43 hp more powerful than 90% (n=448)
- Dig depth 11.8 ft deeper-digging than 91% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 18.56ft in | 5,657mm‖ — metric converted from the published imperial value |
|---|---|---|
| Shipping Height Of Unit | 8.31ft in | 2,533mm‖ — metric converted from the published imperial value |
| Max Loading Height | 12.67ft in | 3,862mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 18.89ft in | 5,758mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 9.32ft in | 2,841mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11.77ft in | 3,587mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 6.07ft in | 1,850mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 6.27ft in | 1,911mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 5.04ft in | 1,536mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 15.75in | 400mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 2.86mph | 4.6km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2334 | |
| Gross Power | 43.2hp | 32.2kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2400rpm | |
| Displacement | 148.6cu in | 2,435cm3‖ — metric converted from the published imperial value |
05 Operational Specification
| Operating Weight | 9832.7lb | 4,460kg‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic Pump Flow Capacity | 15.9gal/min | 60.2l/min‖ — metric converted from the published imperial value |
06 Buckets Specification
| Reference Bucket Capacity | 0.3yd3 |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.