Specification sheet Wheel Loader Ref mustang-ml68-wheel-loader

Mustang ML68

The Mustang ML68 is a wheel loader with an operating weight of 12,015 lb (5,450 kg), a 75 hp engine, and a 2.35 yd³ (1.79 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
12,015lb
5,450kg
Engine power
75hp
55.9kW
Net Power
Bucket capacity
2.35yd³
1.79m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Mustang ML68 sits in the middle of its class:

  • Operating weight 12,020 lb lighter than 55% (n=374)
  • Engine power 75 hp more powerful than 56% (n=367)
  • Bucket capacity 2.4 yd³ larger-bucket than 93% (n=309)

Scale drawingdrawn to scale · mm

2718B330C5588A
Side elevation
2718B1829D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2349
Engine Model BF4M2011
Net Power 75hp 55.9kw
Gross Power 79hp 58.9kw
Power Measured @ 2300rpm
Displacement 190cu in 3.1L
Torque Rise 50%

02 Operational Specification

Operating Weight 12015lb 5450kg
Fuel Capacity 21.1gal 79.8L
Hydraulic System Fluid Capacity 22.5gal 85.1L
Static Tipping Weight 8730lb 3960kg
Turning Radius 13.1ft in 3988mm
Rear Axle Oscillation 40degrees
Tire Size 16 / 70- 20

03 Transmission Specification

Transmission Type Hydrostatic
Number Of Forward Gears 1
Number Of Reverse Gears 1
Max Speed - Forward 12.4mph 20km/h
Max Speed - Reverse 12.4mph 20km/h

04 Hydraulic System Specification

Relief Valve Setting 3191psi 22001.2kPa
Pump Flow Capacity 22.2gal/min 84L/min

05 Bucket Dimensions

Dump Clearance At Max Raise 8.75ft in 2616mm
Bucket Capacity - Heaped 2.35yd3 1.79m3
Bucket Capacity - Struck 1.37yd3 1.04m3
Bucket Width 7.09ft in 2159mm
Breakout Force 9217lb 4181kN

06 Dimensions Dimensions

Ground Clearance 1.09ft in 330mm
Length With Bucket On Ground 18.33ft in 5588mm
Width Over Tires 6ft in 1829mm
Height To Top Of Cab 8.92ft in 2718mm
Wheelbase 6.75ft in 2057mm
Hinge Pin - Max Height 11.17ft in 3404mm
Reach At Max Lift And Dump 2.01ft in 610mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.