Specification sheet Wheel Loader Ref mustang-ml48t-wheel-loader

Mustang ML48T

The Mustang ML48T is a wheel loader with an operating weight of 11,684 lb (5,300 kg), a 59 hp engine, and a 1.83 yd³ (1.4 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
11,684lb
5,300kg
Engine power
59hp
43.9kW
Net Power
Bucket capacity
1.83yd³
1.4m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Mustang ML48T sits in the middle of its class:

  • Operating weight 11,680 lb lighter than 57% (n=374)
  • Engine power 59 hp less powerful than 68% (n=367)
  • Bucket capacity 1.8 yd³ larger-bucket than 73% (n=309)

Scale drawingdrawn to scale · mm

2616B330C5512A
Side elevation
2616B1702D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2349
Engine Model F4M2011
Net Power 59hp 43.9kw
Gross Power 65hp 48.4kw
Power Measured @ 2400rpm
Displacement 190cu in 3.1L
Torque Rise 40%

02 Operational Specification

Operating Weight 11684lb 5300kg
Fuel Capacity 21.1gal 79.8L
Hydraulic System Fluid Capacity 18.5gal 70L
Turning Radius 13.4ft in 4064mm
Rear Axle Oscillation 40degrees
Tire Size 12.5 - 20

03 Transmission Specification

Transmission Type Hydrostatic
Number Of Forward Gears 1
Number Of Reverse Gears 1
Max Speed - Forward 12.4mph 20km/h
Max Speed - Reverse 12.4mph 20km/h

04 Hydraulic System Specification

Relief Valve Setting 3046psi 21001.5kPa
Pump Flow Capacity 19.5gal/min 74L/min

05 Bucket Dimensions

Dump Clearance At Max Raise 9.83ft in 2997mm
Bucket Capacity - Heaped 1.83yd3 1.4m3
Bucket Capacity - Struck 1.12yd3 0.85m3
Bucket Width 6.25ft in 1905mm
Breakout Force 11016lb 49kN

06 Dimensions Dimensions

Ground Clearance 1.09ft in 330mm
Length With Bucket On Ground 18.08ft in 5512mm
Width Over Tires 5.59ft in 1702mm
Height To Top Of Cab 8.58ft in 2616mm
Wheelbase 6.33ft in 1930mm
Hinge Pin - Max Height 11.83ft in 3607mm
Reach At Max Lift And Dump 2.5ft in 762mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.