Specification sheet Wheel Loader Ref mustang-ml48-wheel-loader
Mustang ML48
The Mustang ML48 is a wheel loader with an operating weight of 9,921 lb (4,500.1 kg), a 59 hp engine, and a 1.83 yd³ (1.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,921lb
4,500.1kg
Engine power
59hp
43.9kW
Net Power Bucket capacity
1.83yd³
1.4m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Mustang ML48 sits below the median for its class:
- Operating weight 9,920 lb lighter than 76% (n=374)
- Engine power 59 hp less powerful than 68% (n=367)
- Bucket capacity 1.8 yd³ larger-bucket than 73% (n=309)
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2349 | |
| Engine Model | F4M2011 | |
| Net Power | 59hp | 43.9kw |
| Gross Power | 65hp | 48.4kw |
| Power Measured @ | 2400rpm | |
| Displacement | 190cu in | 3.1L |
02 Operational Specification
| Operating Weight | 9921lb | 4500.1kg |
|---|---|---|
| Fuel Capacity | 21.1gal | 79.8L |
| Hydraulic System Fluid Capacity | 18.5gal | 70L |
| Static Tipping Weight | 7496lb | 3400kg |
| Turning Radius | 11.3ft in | 3429mm |
| Rear Axle Oscillation | 40degrees | |
| Tire Size | 12.5 - 20 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 1 | |
| Number Of Reverse Gears | 1 | |
| Max Speed - Forward | 12.4mph | 20km/h |
| Max Speed - Reverse | 12.4mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3046psi | 21001.5kPa |
|---|---|---|
| Pump Flow Capacity | 19.5gal/min | 74L/min |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.17ft in | 2489mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.83yd3 | 1.4m3 |
| Bucket Capacity - Struck | 1.12yd3 | 0.85m3 |
| Bucket Width | 6.25ft in | 1905mm |
| Breakout Force | 7868lb | 35kN |
06 Dimensions Dimensions
| Ground Clearance | 1.08ft in | 330mm |
|---|---|---|
| Length With Bucket On Ground | 16.68ft in | 5080mm |
| Width Over Tires | 5.58ft in | 1702mm |
| Wheelbase | 6.33ft in | 1930mm |
| Hinge Pin - Max Height | 10.67ft in | 3251mm |
| Reach At Max Lift And Dump | 2.34ft in | 711mm |
?Questions & answersfrom this machine's data
- How much does a Mustang ML48 wheel loader weigh?
- A Mustang ML48 wheel loader has an operating weight of 9,921 lb (4,500.1 kg).
- What engine does a Mustang ML48 wheel loader have?
- A Mustang ML48 wheel loader is powered by a F4M2011 engine producing 59 hp (43.9 kW).
- What size bucket does a Mustang ML48 wheel loader have?
- A Mustang ML48 wheel loader has a bucket capacity of 1.8 yd³ (1.4 m³).
- How much fuel does a Mustang ML48 wheel loader hold?
- A Mustang ML48 wheel loader has a fuel capacity of 21.1 gal (79.8 L).
- What is the ground clearance of a Mustang ML48 wheel loader?
- A Mustang ML48 wheel loader has a ground clearance of 1.1 ft (330 mm).
- How long is a Mustang ML48 wheel loader?
- A Mustang ML48 wheel loader has an overall length of 16.7 ft (5,080 mm) with the bucket on the ground.
- How fast does a Mustang ML48 wheel loader travel?
- A Mustang ML48 wheel loader has a maximum forward travel speed of 12.4 mph (20 km/h).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.