Specification sheet Wheel Loader Ref mustang-ml28-wheel-loader
Mustang ML28
The Mustang ML28 is a wheel loader with an operating weight of 7,055 lb (3,200 kg), a 39 hp engine, and a 1.44 yd³ (1.11 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,055lb
3,200kg
Engine power
39hp
29.1kW
Net Power Bucket capacity
1.44yd³
1.11m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Mustang ML28 sits at the compact end of its class:
- Operating weight 7,060 lb lighter than 91% (n=374)
- Engine power 39 hp less powerful than 90% (n=367)
- Bucket capacity 1.4 yd³ larger-bucket than 52% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TNV88 | |
| Net Power | 39hp | 29.1kw |
| Gross Power | 48hp | 35.8kw |
| Power Measured @ | 2400rpm | |
| Displacement | 133.6cu in | 2.2L |
02 Operational Specification
| Operating Weight | 7055lb | 3200kg |
|---|---|---|
| Fuel Capacity | 15.9gal | 60.2L |
| Static Tipping Weight | 5181lb | 2350kg |
| Turning Radius | 11.2ft in | 3400mm |
| Rear Axle Oscillation | 38degrees | |
| Tire Size | 12.0 - 18 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Max Speed - Forward | 12.4mph | 20km/h |
| Max Speed - Reverse | 12.4mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3336psi | 23000.9kPa |
|---|---|---|
| Pump Flow Capacity | 13.7gal/min | 52L/min |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 7.58ft in | 2311mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.44yd3 | 1.11m3 |
| Bucket Capacity - Struck | 0.85yd3 | 0.65m3 |
| Bucket Width | 5.42ft in | 1650mm |
| Breakout Force | 6.14lb | 28kN |
06 Dimensions Dimensions
| Ground Clearance | 1.08ft in | 330mm |
|---|---|---|
| Length With Bucket On Ground | 15.67ft in | 4780mm |
| Width Over Tires | 4.92ft in | 1500mm |
| Height To Top Of Cab | 7.67ft in | 2340mm |
| Wheelbase | 5.75ft in | 1750mm |
| Hinge Pin - Max Height | 9.92ft in | 3022mm |
| Reach At Max Lift And Dump | 0.84ft in | 254mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.