Mustang 2803ZT
The Mustang 2803ZT is a mini excavator with an operating weight of 5,886 lb, and a 20 hp engine.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Mustang 2803ZT sits in the middle of its class:
- Operating weight 5,890 lb lighter than 60% (n=438)
- Engine power 20 hp less powerful than 66% (n=448)
Not positioned on dig depth — withheld or unpublished for this machine.
01 Dimensions Specification
| Width To Outside Of Tracks | 1.01ft in | 308mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 14ft in | 4,267mm‖ — metric converted from the published imperial value |
| Ground Clearance | 0.91ft in | 277mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8ft in | 2,438mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 2.5ft in | 762mm‖ — metric converted from the published imperial value |
02 Undercarriage Specification
| Shoe Size | 12in | 305mm‖ — metric converted from the published imperial value |
|---|---|---|
| Track Gauge | 5.17ft in | 1,576mm‖ — metric converted from the published imperial value |
| Number Of Track Rollers Per Side | 3 | |
| Number Of Carrier Rollers Per Side | 1 | |
| Max Travel Speed | 2.1mph | 3.4km/h‖ — metric converted from the published imperial value |
| Ground Pressure | 3.8psi | 26kpa‖ — metric converted from the published imperial value |
03 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2291 | |
| Engine Model | YANMAR 3TVNV88-PNS Diesel A TIER III | |
| Gross Power | 24hp | 18kw‖ — metric converted from the published imperial value |
| Net Power | 20hp | 15kw‖ — metric converted from the published imperial value |
| Displacement | 68cu in | 1,114cm3‖ — metric converted from the published imperial value |
04 Operational Specification
| Operating Weight | 5886lb | 2,670kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 9.5gal | 36l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 7gal | 26l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 44amps | |
| Hydraulic System Relief Valve Pressure | 2988psi | 20,602kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 2gal/min | 8l/min‖ — metric converted from the published imperial value |
05 Swing Mechanism Specification
| Swing Speed | 10.3rpm |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.