Specification sheet Skid Steer Loader Ref mustang-2099-skid-steer-loader

Mustang 2099

The Mustang 2099 is a skid steer loader with an operating weight of 10,180.95 lb (4,618 kg), a 85.83 hp engine, a rated operating capacity of 3,400 lb (1,542.22 kg), and a tipping load of 6,800 lb (3,084.43 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
10,180.95lb
4,618kg
Engine power
85.83hp
64kW
Net Power
Rated operating capacity
3,400lb
1,542.22kg
Tipping load
6,800lb † — value reconstructed from related published figures
3,084.43kg

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the Mustang 2099 sits at the heavy end of its class:

  • Operating weight 10,180 lb heavier than 98% (n=334)
  • Engine power 86 hp more powerful than 93% (n=335)
  • Rated operating capacity 3,400 lb higher-rated than 97% (n=288)

◇Scale drawingdrawn to scale · mm

2057C231D4039A3099B
Side elevation
2057C2057E
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2351
Engine Model 1104C-E44
Net Power 85.9hp 64kw
Power Measured @ 2400rpm
Displacement 268.6cu in 4.4L

02 Operational Specification

Operational Weight 10181lb 4618kg
Fuel Capacity 29.1gal 110L
Max Speed 6.5mph 10.4km/h
Hydraulic System Fluid Capacity 15.4gal 58L
Tire Size 14x17.5
Operating Voltage 12V
Alternator Supplied Amperage 950amps

03 Loader Specification

Breakout Force 7880lb 3574.4kg
Operating Load Rating 3400lb 1542.3kg

04 Hydraulic Specification

Pump Flow Capacity 29gal/min 109.8L/min
Relief Valve Pressure 3300psi 22752.7kPa

05 Dimensions Dimensions

Length With Bucket 13.26ft in 4039mm
Width Over Tires 6.75ft in 2057mm
Ground Clearance 9.1in 231mm
Height To Top Of Cab 6.75ft in 2057mm
Wheelbase 4.59ft in 1397mm
Length W/O Bucket 10.17ft in 3099mm
Clearance At Max Lift And Dump 9.13ft in 2781mm
Reach At Max Lift And Dump 36.82in 935mm
Turning Radius From Center - Machine Rear 80.52in 2045mm
Turning Radius From Center - Inc Bucket 98.51in 2502mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.