Specification sheet Skid Steer Loader Ref mustang-2066-skid-steer-loader
Mustang 2066
The Mustang 2066 is a skid steer loader with an operating weight of 7,460 lb (3,384 kg), a 68 hp engine, a rated operating capacity of 2,300 lb (1,043 kg), and a 0.7 yd³ (0.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,460lb
3,384kg
Engine power
68hp
51kW
Net Power Rated operating capacity
2,300lb
1,043kg
Bucket capacity
0.7yd³
0.5m³
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Mustang 2066 sits above the median for its class:
- Operating weight 7,460 lb heavier than 67% (n=334)
- Engine power 68 hp more powerful than 54% (n=335)
- Rated operating capacity 2,300 lb higher-rated than 70% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TNV98 / TIER III | |
| Net Power | 68hp | 51kw |
| Power Measured @ | 2500rpm | |
| Displacement | 202cu in | 3.3L |
02 Operational Specification
| Operational Weight | 7460lb | 3384kg |
|---|---|---|
| Fuel Capacity | 19gal | 72L |
| Hydraulic System Fluid Capacity | 16gal | 60.5L |
| Max Speed | 11.4mph | 18.3km/h |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 950amps |
03 Loader Specification
| Operating Load Rating | 2300lb | 1043kg |
|---|---|---|
| Bucket Capacity | 0.7yd3 | 0.5m3 |
04 Hydraulic Specification
| Pump Flow Capacity | 21.5gal/min | 81L/min |
|---|---|---|
| Relief Valve Pressure | 3000psi | 20684.3kPa |
05 Dimensions Dimensions
| Length With Bucket | 10.76ft in | 3277mm |
|---|---|---|
| Width Over Tires | 5.34ft in | 1626mm |
| Ground Clearance | 7.9in | 201mm |
| Height To Top Of Cab | 6.76ft in | 2060mm |
| Wheelbase | 3.59ft in | 1092mm |
| Length W/O Bucket | 7.75ft in | 2362mm |
| Clearance At Max Lift And Dump | 3.38ft in | 1029mm |
| Reach At Max Lift And Dump | 95in | 2413mm |
| Turning Radius From Center - Machine Rear | 62.6in | 1590mm |
?Questions & answersfrom this machine's data
- How much does a Mustang 2066 skid steer weigh?
- A Mustang 2066 skid steer has an operating weight of 7,460 lb (3,384 kg).
- How much can a Mustang 2066 skid steer lift?
- A Mustang 2066 skid steer has a rated operating capacity of 2,300 lb (1,043 kg).
- What engine does a Mustang 2066 skid steer have?
- A Mustang 2066 skid steer is powered by a 4TNV98 / TIER III engine producing 68 hp (51 kW).
- What is the ground clearance of a Mustang 2066 skid steer?
- A Mustang 2066 skid steer has a ground clearance of 7.9 in (201 mm).
- How long is a Mustang 2066 skid steer?
- A Mustang 2066 skid steer has an overall length of 10.8 ft (3,277 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.