Specification sheet Wheel Loader Ref michigan-l50-wheel-loader
Michigan L50
The Michigan L50 is a wheel loader with an operating weight of 17,857.45 lb (8,100 kg), a 82 hp engine, and a 1.75 yd³ (1.34 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
17,857.45lb
8,100kg
Engine power
82hp
61.2kW
Net Power Bucket capacity
1.75yd³
1.34m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Michigan L50 sits above the median for its class:
- Operating weight 17,860 lb heavier than 77% (n=374)
- Engine power 82 hp more powerful than 65% (n=367)
- Bucket capacity 1.8 yd³ larger-bucket than 72% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2244 | |
| Engine Model | D45B | |
| Net Power | 82hp | 61.2kw |
| Gross Power | 90hp | 67.2kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 223lb ft | 302.4Nm |
| Displacement | 273cu in | 4.5L |
| Torque Measured @ | 1200rpm |
02 Operational Specification
| Operating Weight | 17857.5lb | 8100kg |
|---|---|---|
| Fuel Capacity | 42.3gal | 160.2L |
| Hydraulic System Fluid Capacity | 33gal | 125L |
| Engine Oil Fluid Capacity | 2.8gal | 10.6L |
| Cooling System Fluid Capacity | 7.1gal | 26.9L |
| Transmission Fluid Capacity | 5.8gal | 22L |
| Front Axle/Diff Fluid Capacity | 6gal | 22.8L |
| Rear Axle/Diff Fluid Capacity | 6gal | 22.8L |
| Static Tipping Weight | 11993.2lb | 5440kg |
| Turning Radius | 17.2ft in | 5215mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 15.5-25 |
03 Transmission Specification
| Transmission Type | powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24.8mph | 40km/h |
| Max Speed - Reverse | 15.5mph | 25km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2975psi | 20511.9kPa |
|---|---|---|
| Pump Flow Capacity | 36gal/min | 136.3L/min |
| Raise Time | 5.5sec | |
| Dump Time | 0.9sec | |
| Lower Time | 1.9sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.39ft in | 2860mm |
|---|---|---|
| Bucket Capacity - Struck | 1.4yd3 | 1.08m3 |
| Bucket Width | 7.55ft in | 2300mm |
| Bucket Capacity - Heaped | 1.75yd3 | 1.34m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.27ft in | 385mm |
|---|---|---|
| Length With Bucket On Ground | 19.99ft in | 6090mm |
| Width Over Tires | 7.06ft in | 2150mm |
| Height To Top Of Cab | 9.65ft in | 2940mm |
| Wheelbase | 8.86ft in | 2700mm |
| Hinge Pin - Max Height | 12.18ft in | 3710mm |
| Reach At Max Lift And Dump | 2.73ft in | 830mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.