Specification sheet Wheel Loader Ref michigan-l190b-long-boom-wheel-loader
Michigan L190B Long Boom
The Michigan L190B Long Boom is a wheel loader with an operating weight of 62,470 lb (28,335.92 kg), a 290 hp engine, and a 5.24 yd³ (4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
62,470lb
28,335.92kg
Engine power
290hp
216.3kW
Net Power Bucket capacity
5.24yd³
4m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Michigan L190B Long Boom sits above the median for its class:
- Operating weight 62,470 lb heavier than 73% (n=198)
- Engine power 290 hp more powerful than 61% (n=190)
- Bucket capacity 5.2 yd³ smaller-bucket than 72% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2347 | |
|---|---|---|
| Engine Model | NTA 855C335 | |
| Net Power | 290hp | 216.3kw |
| Gross Power | 322hp | 240.2kw |
| Max Torque | 1006lb ft | 1364Nm |
| Displacement | 855cu in | 14.1L |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 62470lb | 28336kg |
|---|---|---|
| Fuel Capacity | 115.2gal | 436L |
| Hydraulic System Fluid Capacity | 84.1gal | 318L |
| Engine Oil Fluid Capacity | 9.1gal | 34.1L |
| Cooling System Fluid Capacity | 21.1gal | 79.8L |
| Transmission Fluid Capacity | 24.1gal | 91.2L |
| Front Axle/Diff Fluid Capacity | 9.1gal | 34.1L |
| Rear Axle/Diff Fluid Capacity | 9.1gal | 34.1L |
| Static Tipping Weight | 41292lb | 18729.8kg |
| Turning Radius | 26.3ft in | 8001mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 100amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 29.5-25 (22PR) L-3 |
03 Transmission Specification
| Transmission Type | Clark 4425-202 countershaft type powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.2mph | 35.8km/h |
| Max Speed - Reverse | 22.2mph | 35.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2950psi | 20339.6kPa |
|---|---|---|
| Pump Flow Capacity | 70gal/min | 265L/min |
| Raise Time | 6.9sec | |
| Dump Time | 3sec | |
| Lower Time | 4.6sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 12.34ft in | 3759mm |
|---|---|---|
| Bucket Capacity - Heaped | 5.24yd3 | 4m3 |
| Bucket Capacity - Struck | 4.45yd3 | 3.4m3 |
| Bucket Width | 10.84ft in | 3302mm |
| Breakout Force | 53306lb | 237.1kN |
06 Dimensions Dimensions
| Ground Clearance | 1.92ft in | 584mm |
|---|---|---|
| Length With Bucket On Ground | 31.59ft in | 9627mm |
| Width Over Tires | 10.25ft in | 3124mm |
| Height To Top Of Cab | 12.34ft in | 3759mm |
| Wheelbase | 11.5ft in | 3505mm |
| Hinge Pin - Max Height | 16.42ft in | 5004mm |
| Reach At Max Lift And Dump | 4.59ft in | 1397mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.