Specification sheet Wheel Loader Ref michigan-l190-wheel-loader
Michigan L190
The Michigan L190 is a wheel loader with an operating weight of 59,780.56 lb (27,116 kg), a 290 hp engine, and a 5.76 yd³ (4.41 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
59,780.56lb
27,116kg
Engine power
290hp
216.3kW
Net Power Bucket capacity
5.76yd³
4.41m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Michigan L190 sits above the median for its class:
- Operating weight 59,780 lb heavier than 68% (n=198)
- Engine power 290 hp more powerful than 61% (n=190)
- Bucket capacity 5.8 yd³ larger-bucket than 58% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | NTA 855C335 | |
| Net Power | 290hp | 216.3kw |
| Gross Power | 322hp | 240.2kw |
| Power Measured @ | 1900rpm | |
| Max Torque | 1006lb ft | 1364Nm |
| Displacement | 855cu in | 14.1L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbo + aftercooled |
02 Operational Specification
| Operating Weight | 59780.6lb | 27116kg |
|---|---|---|
| Fuel Capacity | 115.2gal | 436L |
| Hydraulic System Fluid Capacity | 85.1gal | 322L |
| Engine Oil Fluid Capacity | 9.1gal | 34.1L |
| Cooling System Fluid Capacity | 20gal | 75.7L |
| Transmission Fluid Capacity | 12.5gal | 47.3L |
| Front Axle/Diff Fluid Capacity | 9.1gal | 34.1L |
| Rear Axle/Diff Fluid Capacity | 9.1gal | 34.1L |
| Static Tipping Weight | 42260.5lb | 19169kg |
| Turning Radius | 25.2ft in | 7658mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 100amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 29.5-25 |
03 Transmission Specification
| Transmission Type | Clark 4425-200 | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.4mph | 35.9km/h |
| Max Speed - Reverse | 22.4mph | 35.9km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2750psi | 18960.6kPa |
|---|---|---|
| Pump Flow Capacity | 35.5gal/min | 134.4L/min |
| Raise Time | 7sec | |
| Dump Time | 3sec | |
| Lower Time | 5sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.5ft in | 3200mm |
|---|---|---|
| Bucket Capacity - Heaped | 5.76yd3 | 4.41m3 |
| Bucket Capacity - Struck | 4.84yd3 | 3.7m3 |
| Bucket Width | 10.84ft in | 3302mm |
| Breakout Force | 58562.73lb | 260.5kN |
06 Dimensions Dimensions
| Ground Clearance | 1.92ft in | 584mm |
|---|---|---|
| Length With Bucket On Ground | 29.92ft in | 9119mm |
| Width Over Tires | 10.25ft in | 3124mm |
| Height To Top Of Cab | 12.34ft in | 3759mm |
| Wheelbase | 11.5ft in | 3505mm |
| Hinge Pin - Max Height | 14.63ft in | 4458mm |
| Reach At Max Lift And Dump | 4.59ft in | 1397mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.