Specification sheet Wheel Loader Ref michigan-l150-wheel-loader
Michigan L150
The Michigan L150 is a wheel loader with an operating weight of 46,870.28 lb (21,260 kg), a 231 hp engine, and a 8.51 yd³ (6.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
46,870.28lb
21,260kg
Engine power
231hp
172.3kW
Net Power Bucket capacity
8.51yd³
6.5m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Michigan L150 sits at the compact end of its class:
- Operating weight 46,870 lb lighter than 89% (n=198)
- Engine power 231 hp less powerful than 87% (n=190)
- Bucket capacity 8.5 yd³ larger-bucket than 99% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2244 | |
| Engine Model | TD 102 GC | |
| Net Power | 231hp | 172.3kw |
| Gross Power | 245hp | 182.7kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 737.6lb ft | 1000Nm |
| Displacement | 585.9cu in | 9.6L |
| Torque Measured @ | 1200rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 46870.3lb | 21260kg |
|---|---|---|
| Fuel Capacity | 89.6gal | 339L |
| Hydraulic System Fluid Capacity | 64.8gal | 245L |
| Engine Oil Fluid Capacity | 7.7gal | 29L |
| Cooling System Fluid Capacity | 17.2gal | 65L |
| Transmission Fluid Capacity | 11.9gal | 45L |
| Front Axle/Diff Fluid Capacity | 12.2gal | 46L |
| Rear Axle/Diff Fluid Capacity | 12.2gal | 46L |
| Static Tipping Weight | 32760lb | 14859.7kg |
| Turning Radius | 24.3ft in | 7392.5mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 15degrees | |
| Tire Size | 26.5-R25 |
03 Transmission Specification
| Transmission Type | Volvo BM HT 210 power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.1mph | 34km/h |
| Max Speed - Reverse | 14.5mph | 23.4km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3046psi | 21001.5kPa |
|---|---|---|
| Pump Flow Capacity | 82.8gal/min | 313.5L/min |
| Raise Time | 6.7sec | |
| Dump Time | 1.9sec | |
| Lower Time | 3.2sec | |
| Pump Type | vane pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10ft in | 3045mm |
|---|---|---|
| Bucket Capacity - Heaped | 8.51yd3 | 6.5m3 |
| Bucket Capacity - Struck | 4.06yd3 | 3.1m3 |
| Bucket Width | 10.5ft in | 3200mm |
| Breakout Force | 37320lb | 166kN |
06 Dimensions Dimensions
| Ground Clearance | 1.58ft in | 481mm |
|---|---|---|
| Length With Bucket On Ground | 26.96ft in | 8215mm |
| Width Over Tires | 9.73ft in | 2964mm |
| Height To Top Of Cab | 11.98ft in | 3649mm |
| Wheelbase | 11.65ft in | 3550mm |
| Hinge Pin - Max Height | 14.28ft in | 4351mm |
| Reach At Max Lift And Dump | 3.99ft in | 1215mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.